What Is This Tool?
This tool enables conversion between the legacy data transfer speed of modem (110) representing approximately 110 bits per second and IDE (PIO mode 3), a programmed I/O transfer mode with a significantly higher maximum throughput used in legacy storage devices.
How to Use This Tool?
-
Enter the desired value in modem (110) units
-
Select 'modem (110)' as the input unit and 'IDE (PIO mode 3)' as the output unit
-
Initiate the conversion to see the equivalent IDE (PIO mode 3) value
-
Use the results for comparisons or documentation in retrocomputing contexts
Key Features
-
Converts between modem (110) and IDE (PIO mode 3) data transfer units
-
Provides exact conversion rates based on legacy standards
-
Ideal for vintage hardware and protocol compatibility testing
-
Browser-based and easy to use for quick calculations
Examples
-
10 modem (110) converts to 0.000012387387387387 IDE (PIO mode 3)
-
100 modem (110) converts to 0.00012387387387387 IDE (PIO mode 3)
Common Use Cases
-
Analyzing character-based teleprinter and teletype communication speeds in legacy systems
-
Testing and comparing vintage hardware or embedded protocol compatibility
-
Documenting old telemetry or serial link data rates specified in low bits per second
-
Assessing legacy desktop or laptop storage device speeds in compatibility modes
Tips & Best Practices
-
Consider the vastly different data transfer scales when interpreting results
-
Use this tool primarily for theoretical comparisons and legacy system documentation
-
Account for protocol overhead and hardware constraints in practical applications
-
Leverage the tool in retrocomputing and industrial diagnostics scenarios
Limitations
-
Conversion is theoretical and involves units with very different throughput scales
-
Practical performance may differ due to protocol and hardware factors
-
Data handling approaches between serial bit rates and block storage throughput differ fundamentally
Frequently Asked Questions
-
What does modem (110) represent?
-
It indicates a legacy modem transmission speed of about 110 bits per second, used historically for dial-up and teletype-style communications.
-
What is IDE (PIO mode 3)?
-
It is a programmed I/O transfer mode for Parallel ATA/IDE storage devices with a theoretical maximum throughput near 11.1 megabytes per second.
-
Why convert between modem (110) and IDE (PIO mode 3)?
-
To compare or emulate vastly different legacy data transfer speeds and test vintage hardware or embedded system protocols.
Key Terminology
-
Modem (110)
-
A legacy data-transfer unit representing a modem speed of approximately 110 bits per second used in early dial-up and teletype communications.
-
IDE (PIO mode 3)
-
A programmed I/O transfer mode for Parallel ATA/IDE devices defined by ATA standards, with a theoretical maximum raw throughput of around 11.1 MB/s.
-
Data Transfer
-
The rate at which data moves from one device or system to another, often measured in bits or bytes per second.