What does SCSI (LVD Ultra160) represent?

It is a parallel SCSI interface standard using Low Voltage Differential signalling, specifying a maximum data-transfer throughput of up to 160 megabytes per second between a host adapter and storage devices.

What is Virtual Tributary 6 (payload)?

It is a SONET/SDH virtual tributary container standardized for carrying defined lower-rate plesiochronous or PDH payloads within a larger synchronous payload envelope.

Why convert SCSI (LVD Ultra160) to Virtual Tributary 6 (payload)?

To translate bandwidth capacity of legacy parallel SCSI storage interfaces into equivalent SONET/SDH containers, enabling integration and transport of legacy storage data streams within optical networks.

How to Convert from SCSI (LVD Ultra160) to Virtual Tributary 6 (payload)?

Convert data transfer rates from the SCSI (LVD Ultra160) interface standard to the Virtual Tributary 6 (payload) SONET/SDH container format with ease. Understand the conversion process, uses, and limitations.

SCSI (LVD Ultra160)

Virtual Tributary 6 (payload)

Please check your input. It must be a valid numeric value.

SCSI (LVD Ultra160) to Virtual Tributary 6 (payload) Conversion Table

SCSI (LVD Ultra160)	Virtual Tributary 6 (payload)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (LVD Ultra160) to Virtual Tributary 6 (payload) Conversion Table
SCSI (LVD Ultra160)	Virtual Tributary 6 (payload)

Explore More Data Transfer Units Converter

What Is This Tool?

This online unit converter allows you to translate data transfer capacity from SCSI (LVD Ultra160)—a legacy parallel SCSI interface standard—into Virtual Tributary 6 (payload), a SONET/SDH virtual tributary container used for carrying lower-rate payloads within synchronous optical networks.

How to Use This Tool?

Enter the data transfer value in SCSI (LVD Ultra160) units
Choose Virtual Tributary 6 (payload) as the target unit
Click the convert button to see the equivalent value
Review the result based on the provided conversion rate
Use the information to plan bandwidth or network integration

Key Features

Converts data transfer units from SCSI (LVD Ultra160) to Virtual Tributary 6 (payload)
Browser-based and easy to use without installation
Supports legacy and optical networking measurement interoperability
Provides a clear conversion rate and formula for reference
Suitable for telecommunication and data migration contexts

Examples

1 SCSI (LVD Ultra160) equals approximately 213.33 Virtual Tributary 6 (payload)
2 SCSI (LVD Ultra160) equals approximately 426.67 Virtual Tributary 6 (payload)

Common Use Cases

Specifying maximum data-transfer rates for internal disk arrays and RAID controllers in legacy servers
Comparing throughput of tape drives and backup systems using parallel SCSI interfaces
Assessing storage bus bandwidth during migration or planning system compatibility
Mapping legacy PDH circuits over SONET rings
Aggregating multiple low-rate services for efficient optical transport
Integrating legacy storage data streams within optical network infrastructures

Tips & Best Practices

Understand that the conversion reflects theoretical bandwidth capacity
Use this tool to assist in telecommunications and data center migration planning
Consider compatibility constraints of legacy interfaces when integrating with SONET/SDH networks
Review network requirements to ensure appropriate mapping of data streams
Cross-check results with physical system capabilities where possible

Limitations

Conversion shows theoretical maximum bandwidth, not accounting for protocol overhead or encoding inefficiencies
Real-world throughput may vary from calculated values
Legacy SCSI (LVD Ultra160) interfaces may have compatibility limits with SONET/SDH networks
Does not capture all operational constraints of network equipment or data paths

Frequently Asked Questions

What does SCSI (LVD Ultra160) represent?: It is a parallel SCSI interface standard using Low Voltage Differential signalling, specifying a maximum data-transfer throughput of up to 160 megabytes per second between a host adapter and storage devices.
What is Virtual Tributary 6 (payload)?: It is a SONET/SDH virtual tributary container standardized for carrying defined lower-rate plesiochronous or PDH payloads within a larger synchronous payload envelope.
Why convert SCSI (LVD Ultra160) to Virtual Tributary 6 (payload)?: To translate bandwidth capacity of legacy parallel SCSI storage interfaces into equivalent SONET/SDH containers, enabling integration and transport of legacy storage data streams within optical networks.

Key Terminology

SCSI (LVD Ultra160): A parallel SCSI interface standard using Low Voltage Differential signaling with max sustained throughput of up to 160 MB/s for storage devices.
Virtual Tributary 6 (payload): A standardized SONET/SDH virtual tributary container for carrying lower-rate plesiochronous or PDH payloads within a larger synchronous payload frame.
Data transfer rate: The speed at which data is transmitted from one device or system to another, commonly measured in megabytes per second or equivalent units.

Quick Knowledge Check

What type of signaling does SCSI (LVD Ultra160) use?

High Voltage Single-Ended

Low Voltage Differential

Optical Signaling

Virtual Tributary 6 (payload) is used primarily in which context?

Wireless communications

SONET/SDH optical transport

Ethernet networking

One SCSI (LVD Ultra160) unit equals approximately how many Virtual Tributary 6 (payload) units?

100

213.33

500

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter