What does SCSI (LVD Ultra160) mean?

SCSI (LVD Ultra160) is a parallel SCSI interface standard using Low Voltage Differential signaling with a maximum data transfer rate of up to 160 megabytes per second.

Why is IDE (PIO mode 0) slower than SCSI (LVD Ultra160)?

IDE (PIO mode 0) uses CPU-driven data transfers without DMA, resulting in lower throughput and slower maximum data rates compared to the faster SCSI (LVD Ultra160) interface.

When should I use this converter?

This conversion is useful for assessing speed differences during legacy system comparisons, vintage hardware maintenance, or data migration planning involving SCSI and IDE storage interfaces.

Convert SCSI (LVD Ultra160) to IDE (PIO mode 0) Online

Use this online tool to convert data transfer rates from SCSI (LVD Ultra160) to IDE (PIO mode 0). Understand and compare legacy storage interface speeds quickly and easily.

SCSI (LVD Ultra160)

IDE (PIO mode 0)

Please check your input. It must be a valid numeric value.

SCSI (LVD Ultra160) to IDE (PIO mode 0) Conversion Table

SCSI (LVD Ultra160)	IDE (PIO mode 0)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (LVD Ultra160) to IDE (PIO mode 0) Conversion Table
SCSI (LVD Ultra160)	IDE (PIO mode 0)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to translate data transfer rates from SCSI (LVD Ultra160), a high-speed parallel SCSI interface, to IDE (PIO mode 0), an older, slower CPU-driven data transfer mode. It's designed to help users assess and compare the maximum theoretical throughput of two distinct legacy storage technologies.

How to Use This Tool?

Enter the data transfer value in the SCSI (LVD Ultra160) field
Select the source unit as SCSI (LVD Ultra160) and target unit as IDE (PIO mode 0)
Click the convert button to view the equivalent value in IDE (PIO mode 0) units
Use the results to compare or assess the relative data transfer speeds of legacy storage interfaces

Key Features

Converts data transfer values between SCSI (LVD Ultra160) and IDE (PIO mode 0)
Based on the defined conversion factor: 1 SCSI (LVD Ultra160) equals approximately 48.48 IDE (PIO mode 0)
Supports understanding of legacy storage interface speeds for planning and comparison
Browser-based and easy to use with simple input and selection options
Provides quick results useful for compatibility and migration assessments

Examples

Convert 1 SCSI (LVD Ultra160) to get approximately 48.48 IDE (PIO mode 0)
Convert 10 SCSI (LVD Ultra160) to receive about 484.85 IDE (PIO mode 0)

Common Use Cases

Planning data migration involving legacy storage systems
Comparing throughput of parallel SCSI arrays with older IDE drives
Assessing compatibility in vintage PC repair or embedded system setups
Understanding bandwidth differences in legacy server hardware
Evaluating performance between different storage interface technologies

Tips & Best Practices

Use the tool for theoretical maximum data transfer comparisons, not actual sustained rates
Keep in mind the slower throughput and CPU involvement in IDE PIO mode 0 transfers
Apply results in vintage hardware compatibility and diagnostics planning
Reference multiple values to get a fuller picture when planning migrations involving legacy devices
Consider this conversion as part of broader performance and compatibility assessments

Limitations

IDE (PIO mode 0) represents a much slower data transfer mode with theoretical maximum near 3.3 MB/s
Performance depends heavily on CPU-driven transfers and older technology constraints
Conversion values reflect maximum theoretical bandwidth, not actual real-world throughput
This conversion applies mainly to legacy systems and may not correspond to current storage technologies

Frequently Asked Questions

What does SCSI (LVD Ultra160) mean?: SCSI (LVD Ultra160) is a parallel SCSI interface standard using Low Voltage Differential signaling with a maximum data transfer rate of up to 160 megabytes per second.
Why is IDE (PIO mode 0) slower than SCSI (LVD Ultra160)?: IDE (PIO mode 0) uses CPU-driven data transfers without DMA, resulting in lower throughput and slower maximum data rates compared to the faster SCSI (LVD Ultra160) interface.
When should I use this converter?: This conversion is useful for assessing speed differences during legacy system comparisons, vintage hardware maintenance, or data migration planning involving SCSI and IDE storage interfaces.

Key Terminology

SCSI (LVD Ultra160): A parallel SCSI interface standard using Low Voltage Differential signaling with bandwidth up to 160 MB/s, used for measuring legacy storage throughput.
IDE (PIO mode 0): An ATA/IDE Programmed Input/Output timing mode representing the slowest CPU-driven data transfer standard, often used for compatibility with older drives.
Data Transfer Rate: The speed at which data is moved from one device or interface to another, typically measured in megabytes per second (MB/s).

Quick Knowledge Check

What is the approximate conversion rate from 1 SCSI (LVD Ultra160) to IDE (PIO mode 0)?

1 IDE (PIO mode 0)

48.48 IDE (PIO mode 0)

160 IDE (PIO mode 0)

Which characteristic applies to IDE (PIO mode 0)?

High-speed DMA data transfers

CPU-driven transfers without DMA

Low Voltage Differential signaling

What is a common use case for converting from SCSI (LVD Ultra160) to IDE (PIO mode 0)?

Planning compatibility in vintage PC repair

Configuring modern SSD devices

Designing new high-speed storage interfaces

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter