What is SCSI (LVD Ultra160)?

SCSI (LVD Ultra160) is a parallel SCSI interface standard that uses low voltage differential signalling to provide up to 160 MB/s maximum sustained data-transfer throughput between host adapters and SCSI devices.

Is H11 a standard data transfer unit?

No, H11 is not a recognized or standard unit for data transfer. Conventional units like MB/s, Mbps, and Gbps are preferred.

Why convert SCSI (LVD Ultra160) to H11?

Users may convert to H11 to relate legacy SCSI interface bandwidth values to alternate units for comparative analysis despite H11 lacking formal recognition.

How to Convert from SCSI (LVD Ultra160) to H11?

Learn how to convert data transfer rates from SCSI (LVD Ultra160), a parallel SCSI interface standard, into H11 units using our online converter tool. Understand the context, use cases, and limitations of this conversion.

SCSI (LVD Ultra160)

H11

Please check your input. It must be a valid numeric value.

SCSI (LVD Ultra160) to H11 Conversion Table

SCSI (LVD Ultra160)	H11

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (LVD Ultra160) to H11 Conversion Table
SCSI (LVD Ultra160)	H11

Explore More Data Transfer Units Converter

What Is This Tool?

This converter helps translate data transfer rates from SCSI (LVD Ultra160), a legacy parallel SCSI interface with low voltage differential signalling, into H11, a non-standard unit of data transfer. It is designed to support comparisons across different units in legacy storage and engineering contexts.

How to Use This Tool?

Enter the value in SCSI (LVD Ultra160) units.
Select SCSI (LVD Ultra160) as the source unit and H11 as the target unit.
Click the convert button to obtain the equivalent value in H11.
Use the conversion result to assist in comparing legacy storage data transfer metrics.

Key Features

Converts data transfer rates between SCSI (LVD Ultra160) and H11 units.
Supports legacy storage performance and bandwidth analysis.
Provides straightforward numeric conversion based on a defined ratio.
Browser-based and easy to use without special software.

Examples

2 SCSI (LVD Ultra160) equals 1666.67 H11 by multiplying 2 by 833.3333333333.
0.5 SCSI (LVD Ultra160) equals 416.67 H11 by multiplying 0.5 by 833.3333333333.

Common Use Cases

Specifying the maximum data-transfer rate for internal disk arrays and legacy RAID controllers.
Comparing throughput of tape drives and backup equipment using parallel SCSI.
Evaluating legacy storage bus bandwidth during infrastructure migration planning.
Translating SCSI (LVD Ultra160) performance data into alternative units for analysis.

Tips & Best Practices

Prefer using conventional units like MB/s, Mbps, or Gbps for clearer data transfer communication.
Use this conversion mainly for legacy system documentation or comparative analysis.
Be aware that H11 is not a standard or widely recognized unit, so interpret results cautiously.

Limitations

H11 is not an industry-standard unit, making its comprehension difficult.
Conversion is purely numerical without a formal physical standard backing H11.
Using H11 may lead to confusion or misinterpretation in technical settings.
For accurate measurements, rely on conventional transfer rate units instead.

Frequently Asked Questions

What is SCSI (LVD Ultra160)?: SCSI (LVD Ultra160) is a parallel SCSI interface standard that uses low voltage differential signalling to provide up to 160 MB/s maximum sustained data-transfer throughput between host adapters and SCSI devices.
Is H11 a standard data transfer unit?: No, H11 is not a recognized or standard unit for data transfer. Conventional units like MB/s, Mbps, and Gbps are preferred.
Why convert SCSI (LVD Ultra160) to H11?: Users may convert to H11 to relate legacy SCSI interface bandwidth values to alternate units for comparative analysis despite H11 lacking formal recognition.

Key Terminology

SCSI (LVD Ultra160): A parallel SCSI standard using low voltage differential signalling, specifying data transfer performance up to 160 MB/s.
H11: A non-standard and unrecognized unit for data transfer rates, used here only for comparative numeric conversions.
Data Transfer Rate: The speed at which data moves from one device to another, commonly measured in bits or bytes per second.

Quick Knowledge Check

What does SCSI (LVD Ultra160) measure?

Network internet speed in Mbps

Maximum sustained data transfer rate for certain SCSI interfaces

File size in bytes

Is H11 a widely accepted data transfer unit?

Yes, widely used in all IT contexts

No, it is not a recognized standard unit

Only used for measuring disk sizes

What is a recommended unit over H11 for data transfer?

Milliseconds (ms)

Megabytes per second (MB/s)

Celsius (°C)

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter