What does SCSI (LVD Ultra160) represent?

It is a parallel SCSI interface standard using Low Voltage Differential signalling, specifying maximum sustained data-transfer throughput up to 160 MB/s between host adapters and storage devices.

What is STM-4 (signal)?

STM-4 (signal) is a level‑4 Synchronous Transport Module in the Synchronous Digital Hierarchy, with a nominal line rate of 622.08 Mbit/s used to multiplex and transport digital traffic over optical networks.

Why convert SCSI (LVD Ultra160) to STM-4 (signal)?

Users convert to compare or translate legacy storage interface bandwidths into optical telecom signal rates, aiding planning and integration with carrier-grade optical networks.

How to Convert from SCSI (LVD Ultra160) to STM-4 (signal)?

Convert data transfer rates from SCSI (LVD Ultra160), a parallel storage interface standard, to STM-4 (signal), an optical telecom line rate. Understand their definitions, use cases, and conversion process with examples.

SCSI (LVD Ultra160)

STM-4 (signal)

Please check your input. It must be a valid numeric value.

SCSI (LVD Ultra160) to STM-4 (signal) Conversion Table

SCSI (LVD Ultra160)	STM-4 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (LVD Ultra160) to STM-4 (signal) Conversion Table
SCSI (LVD Ultra160)	STM-4 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool enables conversion between SCSI (LVD Ultra160) and STM-4 (signal) units, translating storage interface bandwidth to standardized optical telecom signal rates for planning and integration in various engineering contexts.

How to Use This Tool?

Enter the value in SCSI (LVD Ultra160) units you wish to convert.
Select STM-4 (signal) as the target unit.
Click the convert button to receive the equivalent in STM-4 (signal).
Review the converted value and use the examples for reference as needed.

Key Features

Converts data transfer measurements from SCSI (LVD Ultra160) to STM-4 (signal).
Supports comparisons between storage interface throughput and telecom optical line rates.
Provides exact conversion using the defined rate of 1 SCSI (LVD Ultra160) = 2.0576131687 STM-4 (signal).
Includes illustrative examples for ease of understanding.
Browser-based and easy to use without installation.

Examples

1 SCSI (LVD Ultra160) equals approximately 2.0576 STM-4 (signal).
5 SCSI (LVD Ultra160) equals approximately 10.2881 STM-4 (signal).

Common Use Cases

Specifying maximum data-transfer bandwidth in legacy internal disk arrays and RAID controllers.
Comparing throughput of legacy parallel SCSI tape drives and backup systems.
Planning migration or compatibility by assessing legacy storage bus bandwidth.
Aggregating voice, data, and leased circuits over regional or inter-city optical backbone links.
Interconnecting multiple lower-rate PDH/SDH circuits within carrier network infrastructure.
Transporting wholesale Ethernet, ATM, or other telecom services using SDH frameworks.

Tips & Best Practices

Understand the conceptual difference between storage bandwidth and telecom line rates before converting.
Use the tool to assist in legacy system migration planning and network engineering comparisons.
Refer to multiple examples to verify conversion outcomes before practical application.
Keep in mind the conversion assumes bandwidth equivalence and may not reflect real-time payload variations.

Limitations

SCSI (LVD Ultra160) bandwidth is measured in megabytes per second, while STM-4 (signal) is a telecom optical line rate in megabits per second.
Conversion assumes equivalence of bandwidth but does not consider protocol overhead or data payload differences.
Direct translation may not cover all performance aspects in real-time data transfer.
This tool focuses on bandwidth comparison and does not account for lower-level physical or protocol details.

Frequently Asked Questions

What does SCSI (LVD Ultra160) represent?: It is a parallel SCSI interface standard using Low Voltage Differential signalling, specifying maximum sustained data-transfer throughput up to 160 MB/s between host adapters and storage devices.
What is STM-4 (signal)?: STM-4 (signal) is a level‑4 Synchronous Transport Module in the Synchronous Digital Hierarchy, with a nominal line rate of 622.08 Mbit/s used to multiplex and transport digital traffic over optical networks.
Why convert SCSI (LVD Ultra160) to STM-4 (signal)?: Users convert to compare or translate legacy storage interface bandwidths into optical telecom signal rates, aiding planning and integration with carrier-grade optical networks.

Key Terminology

SCSI (LVD Ultra160): A parallel SCSI interface standard using Low Voltage Differential signalling to provide up to 160 MB/s bandwidth between host adapters and storage devices.
STM-4 (signal): The Synchronous Transport Module level‑4 in SDH, offering a 622.08 Mbit/s optical transmission rate used for multiplexing and transporting digital traffic.
Data Transfer Rate: The measurement of the speed at which data is transmitted from one device or interface to another.

Quick Knowledge Check

What is the main use of SCSI (LVD Ultra160)?

To measure optical line rates in telecom.

To specify bandwidth for parallel SCSI storage interfaces.

To multiplex digital traffic over fiber networks.

Which unit describes a standardized optical transmission frame?

SCSI (LVD Ultra160)

STM-4 (signal)

RAID controller throughput

What is the approximate conversion rate from 1 SCSI (LVD Ultra160) to STM-4 (signal)?

0.5 STM-4 (signal)

2.0576 STM-4 (signal)

160 STM-4 (signal)

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter