What does SCSI (LVD Ultra160) represent?

It is a parallel SCSI interface standard using Low Voltage Differential signaling with up to 160 MB/s bandwidth, indicating maximum sustained data transfer between host adapters and storage devices.

What is IDE (PIO mode 1)?

IDE (PIO mode 1) is a CPU-controlled data transfer mode for Parallel ATA devices, offering lower throughput with higher CPU overhead compared to DMA modes.

Why convert between these two units?

Conversion helps compare or adapt data transfer rates when dealing with legacy server systems, backup solutions, or firmware development involving different storage interface standards.

How to Convert from SCSI (LVD Ultra160) to IDE (PIO mode 1)?

Convert data transfer rates from SCSI (LVD Ultra160) to IDE (PIO mode 1) using this online tool. Easily compare performance metrics of legacy storage interfaces to support system migration and diagnostics.

SCSI (LVD Ultra160)

IDE (PIO mode 1)

Please check your input. It must be a valid numeric value.

SCSI (LVD Ultra160) to IDE (PIO mode 1) Conversion Table

SCSI (LVD Ultra160)	IDE (PIO mode 1)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (LVD Ultra160) to IDE (PIO mode 1) Conversion Table
SCSI (LVD Ultra160)	IDE (PIO mode 1)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows users to translate data transfer values between SCSI (LVD Ultra160), a high-throughput parallel SCSI interface standard, and IDE (PIO mode 1), a CPU-driven transfer mode for PATA devices. It helps compare performance metrics of different legacy storage technologies.

How to Use This Tool?

Enter the data transfer value in SCSI (LVD Ultra160) units
Select the target unit as IDE (PIO mode 1)
Click the convert button to see the equivalent value
Use the resulting value to compare or adapt performance between legacy interfaces

Key Features

Browser-based and easy to use for quick unit conversions
Converts data transfer rates from SCSI (LVD Ultra160) to IDE (PIO mode 1)
Supports legacy IT and storage device benchmarking and performance comparison
Provides a direct conversion ratio based on theoretical maximum throughput
Useful for assessing compatibility and planning migration between hardware standards

Examples

1 SCSI (LVD Ultra160) equals approximately 30.77 IDE (PIO mode 1)
5 SCSI (LVD Ultra160) converts to about 153.85 IDE (PIO mode 1)

Common Use Cases

Specifying maximum data-transfer rates for internal disk arrays in legacy servers
Comparing throughput of tape drives and backup systems using parallel SCSI
Configuring or diagnosing legacy PATA hard drives and optical drives
Benchmarking data-transfer performance on vintage or embedded systems
Supporting firmware development where CPU-driven transfers are necessary

Tips & Best Practices

Use the converter for theoretical maximum throughput comparisons rather than exact performance prediction
Consider system-specific factors like CPU load and device limitations when interpreting results
Apply the tool mainly for legacy hardware compatibility and migration planning
Remember the difference in hardware architectures when assessing direct equivalence
Use multiple measurements and testing methods for comprehensive performance evaluation

Limitations

Conversion shows theoretical maximum rates without reflecting CPU overhead in PIO mode
Does not account for device-specific or environmental factors affecting actual performance
SCSI (LVD Ultra160) and IDE (PIO mode 1) use differing protocols and hardware, impacting direct comparison accuracy

Frequently Asked Questions

What does SCSI (LVD Ultra160) represent?: It is a parallel SCSI interface standard using Low Voltage Differential signaling with up to 160 MB/s bandwidth, indicating maximum sustained data transfer between host adapters and storage devices.
What is IDE (PIO mode 1)?: IDE (PIO mode 1) is a CPU-controlled data transfer mode for Parallel ATA devices, offering lower throughput with higher CPU overhead compared to DMA modes.
Why convert between these two units?: Conversion helps compare or adapt data transfer rates when dealing with legacy server systems, backup solutions, or firmware development involving different storage interface standards.

Key Terminology

SCSI (LVD Ultra160): A parallel SCSI interface standard using Low Voltage Differential signaling with a maximum throughput of 160 MB/s.
IDE (PIO mode 1): A Programmed Input/Output mode for PATA devices where the CPU controls data transfer cycles, typically with higher CPU load.
Data Transfer Rate: The speed at which data is transmitted between devices, often measured in megabytes per second (MB/s).

Quick Knowledge Check

What is the max channel bandwidth for SCSI (LVD Ultra160)?

80 MB/s

160 MB/s

320 MB/s

What controls data transfer in IDE (PIO mode 1)?

DMA controller

Host CPU

Direct memory access

What is a common use for converting SCSI to IDE units?

To upgrade firmware automatically

To assess legacy device compatibility

To increase real-time throughput

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter