What Is This Tool?
This tool converts data transfer values from a modem (56k), a dial-up internet connection standard, to SCSI (LVD Ultra160), a legacy parallel storage interface, helping users understand differences in data transfer rates across different technologies.
How to Use This Tool?
-
Enter the data transfer rate value in modem (56k) units.
-
Select modem (56k) as the source unit and SCSI (LVD Ultra160) as the target unit.
-
Click the convert button to view the equivalent transfer rate in SCSI (LVD Ultra160).
-
Use the conversion to compare the speeds for your legacy system evaluation.
Key Features
-
Converts data transfer units from modem (56k) to SCSI (LVD Ultra160).
-
Based on the theoretical maximum rates of each technology.
-
Helps compare network and storage data rates in legacy systems.
-
Simple and browser-based, no installation needed.
-
Supports analysis relevant for telecommunications and IT migration.
Examples
-
10 modem (56k) converts to 0.0004375 SCSI (LVD Ultra160).
-
100 modem (56k) converts to 0.004375 SCSI (LVD Ultra160).
Common Use Cases
-
Residential dial-up internet setup comparisons in areas lacking broadband.
-
Backup or remote network access involving legacy telephone lines.
-
Evaluating legacy telemetry or machine-to-machine communication speeds.
-
Specifying internal disk array performance in older servers.
-
Comparing tape drive throughput using parallel SCSI interfaces.
-
Planning IT migrations by assessing legacy storage bus bandwidth.
Tips & Best Practices
-
Understand the differences between network and storage data transfer contexts.
-
Use the tool to support legacy system compatibility and performance analysis.
-
Verify that conversions reflect theoretical maximums and not actual operational speeds.
-
Consider both units’ measurement contexts (bits per second vs. bytes per second) when interpreting results.
Limitations
-
Compares fundamentally different technologies: network versus storage data rates.
-
Represents maximum theoretical speeds which vary in real use.
-
Units correspond to different measurement contexts and signal types, limiting practical interchangeability.
Frequently Asked Questions
-
What is a modem (56k)?
-
A modem (56k) is a dial-up device that modulates and demodulates digital signals for transmission over telephone lines with a maximum theoretical downstream rate of about 56 kilobits per second.
-
What does SCSI (LVD Ultra160) represent?
-
SCSI (LVD Ultra160) is a parallel SCSI interface standard employing Low Voltage Differential signalling with a maximum data throughput of up to 160 megabytes per second.
-
Why convert from modem (56k) to SCSI (LVD Ultra160)?
-
Users convert between these units to compare vastly different data rates and help evaluate legacy network and storage system performance or compatibility.
Key Terminology
-
Modem (56k)
-
A dial-up modem standard using ITU V.90 or V.92 for digital data transmission over telephone lines at up to 56 kilobits per second.
-
SCSI (LVD Ultra160)
-
A parallel SCSI interface standard with Low Voltage Differential signalling providing up to 160 megabytes per second data throughput for storage devices.
-
Data Transfer Rate
-
The speed at which data is transmitted from one device to another, measured differently depending on context such as network or storage.