What does SCSI (LVD Ultra160) measure?

It measures the maximum sustained data transfer throughput of a parallel SCSI interface using Low Voltage Differential signalling, up to 160 megabytes per second.

What is the STS48 (signal) standard used for?

STS48 (signal) is a SONET signal level used for carrying multiplexed digital payloads over optical fiber at about 2.48832 gigabits per second, commonly employed in carrier backbone and data center interconnects.

Why convert from SCSI (LVD Ultra160) to STS48 (signal)?

Conversion helps translate storage interface bandwidth into telecommunications network signal capacity, aiding compatibility and performance evaluations between legacy storage and modern network systems.

How to Convert from SCSI (LVD Ultra160) to STS48 (signal)?

Learn how to convert data transfer rates from SCSI (LVD Ultra160) to STS48 (signal) for evaluating legacy storage bandwidth alongside modern optical transport signals.

SCSI (LVD Ultra160)

STS48 (signal)

Please check your input. It must be a valid numeric value.

SCSI (LVD Ultra160) to STS48 (signal) Conversion Table

SCSI (LVD Ultra160)	STS48 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (LVD Ultra160) to STS48 (signal) Conversion Table
SCSI (LVD Ultra160)	STS48 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to translate data transfer speeds from the SCSI (LVD Ultra160) interface standard into the STS48 (signal) rate used in telecommunications. It helps bridge the understanding of legacy storage performance with high-capacity optical network signals.

How to Use This Tool?

Enter the value in SCSI (LVD Ultra160) units you wish to convert
Select the target unit as STS48 (signal)
Click the convert button to see the equivalent signal rate
Use the results to help compare storage bandwidth against telecommunications capacities

Key Features

Converts data transfer units between SCSI (LVD Ultra160) and STS48 (signal)
Offers a browser-based, easy-to-use interface for quick calculations
Supports evaluation for legacy storage and modern networking integration
Directly applies the defined conversion rate of 1 SCSI (LVD Ultra160) to 0.5144032922 STS48 (signal)

Examples

10 SCSI (LVD Ultra160) convert to 5.144032922 STS48 (signal)
2 SCSI (LVD Ultra160) convert to 1.028806584 STS48 (signal)

Common Use Cases

Specifying maximum throughput for internal disk arrays and RAID systems in legacy servers
Comparing data rates of tape drives and parallel SCSI interfaces
Assessing legacy storage bandwidth during system migrations or compatibility evaluations
Translating storage interface speeds into telecommunications network signal capacities
Planning interconnects between core routers or large data centers

Tips & Best Practices

Always confirm units before converting to avoid misinterpretation
Use conversions as a guideline for performance assessments, not exact traffic measurements
Consider protocol and signaling overhead which are not reflected in raw bandwidth rates
Apply this conversion primarily for legacy storage and SONET transport evaluations
Consult network architects or system engineers when planning integrations involving these units

Limitations

Bandwidth units differ: SCSI uses megabytes per second (MB/s), while STS48 uses gigabits per second (Gbit/s)
Conversion assumes maximum sustained throughput without accounting for real-world inefficiencies
Not suitable for newer storage and network technologies with different metrics
Does not factor in protocol overhead or traffic variations that can affect effective throughput

Frequently Asked Questions

What does SCSI (LVD Ultra160) measure?: It measures the maximum sustained data transfer throughput of a parallel SCSI interface using Low Voltage Differential signalling, up to 160 megabytes per second.
What is the STS48 (signal) standard used for?: STS48 (signal) is a SONET signal level used for carrying multiplexed digital payloads over optical fiber at about 2.48832 gigabits per second, commonly employed in carrier backbone and data center interconnects.
Why convert from SCSI (LVD Ultra160) to STS48 (signal)?: Conversion helps translate storage interface bandwidth into telecommunications network signal capacity, aiding compatibility and performance evaluations between legacy storage and modern network systems.

Key Terminology

SCSI (LVD Ultra160): A parallel SCSI interface standard using Low Voltage Differential signalling with maximum throughput up to 160 megabytes per second.
STS48 (signal): A SONET signal level equivalent to OC-48 providing a synchronous transport rate around 2.48832 gigabits per second over optical fiber.
Data Transfer Rate: The amount of digital data transferred per unit of time, commonly measured in megabytes per second or gigabits per second.

Quick Knowledge Check

What measurement unit does SCSI (LVD Ultra160) use for bandwidth?

Gigabits per second (Gbit/s)

Megabytes per second (MB/s)

Terabytes per second (TB/s)

STS48 (signal) corresponds to which transport technology?

Ethernet

SONET

InfiniBand

What is a key limitation when converting SCSI (LVD Ultra160) to STS48 (signal)?

It does not account for protocol overhead

Conversion works for all new technologies

It directly measures fiber optic length

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter