What does IDE (UDMA mode 2) represent?

IDE (UDMA mode 2) is an Ultra DMA transfer mode for Parallel ATA interfaces that provides a theoretical maximum transfer rate of about 33.3 megabytes per second.

What is T1C (payload)?

T1C (payload) refers to the user-data portion of a T1 digital carrier after framing and control overhead are removed, typically about 1.536 Mbps for a standard T1 line.

Convert IDE (UDMA mode 2) to T1C (payload) Data Transfer Units

Q: Why might the conversion between IDE (UDMA mode 2) and T1C (payload) be approximate?

Because these units measure data transfer differently, with differing protocols, overhead, and units (megabytes per second vs. Mbps), the conversion cannot be exact.

Easily convert data transfer rates from IDE (UDMA mode 2) to T1C (payload) to compare legacy PC hardware interfaces with telecommunications payload capacities. Use this tool for benchmarking and throughput analysis.

IDE (UDMA mode 2)

T1C (payload)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 2) to T1C (payload) Conversion Table

IDE (UDMA mode 2)	T1C (payload)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 2) to T1C (payload) Conversion Table
IDE (UDMA mode 2)	T1C (payload)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows users to transform data transfer values from IDE (UDMA mode 2), a legacy PC interface transfer mode, into T1C (payload), a telecommunications term denoting the effective user-data rate of a T1 digital carrier. It assists in comparing and analyzing transfer rates across different domains.

How to Use This Tool?

Enter the value in IDE (UDMA mode 2) units you want to convert
Select IDE (UDMA mode 2) as the source unit and T1C (payload) as the target unit
Click the convert button to see the equivalent value in T1C (payload)
Review the conversion results and use them for your analysis or configuration

Key Features

Converts data transfer rates between IDE (UDMA mode 2) and T1C (payload) units
Supports legacy PC hardware and telecommunications transfer rate comparison
Provides clear examples illustrating the conversion process
Browser-based and easy to use interface
Helps benchmark and assess throughput performance across different technologies

Examples

Converting 1 IDE (UDMA mode 2) equals approximately 98.214 T1C (payload)
Converting 0.5 IDE (UDMA mode 2) equals approximately 49.107 T1C (payload)

Common Use Cases

Configuring and identifying legacy PC BIOS or drive-controller settings for ATA/33 transfer performance
Interpreting and comparing disk throughput or benchmark results involving UDMA mode 2 devices
Troubleshooting PATA system compatibility and firmware issues related to transfer modes
Measuring effective throughput of leased T1 circuits for service-level verification
Capacity planning and billing for voice and data services over T1 links
Monitoring payload throughput to detect framing or overhead losses in T1 lines

Tips & Best Practices

Use this conversion to compare theoretical transfer rates between PC hardware and telecom payloads
Consider overhead and framing differences when interpreting the results
Use the tool to assist in benchmarking and troubleshooting both legacy and telecom systems
Remember the conversion is approximate due to different measurement standards
Leverage conversion results for network capacity planning and SLA assessments

Limitations

IDE (UDMA mode 2) represents a theoretical maximum transfer rate and may not reflect actual speeds
T1C (payload) only accounts for user data after framing and control overhead are subtracted
The conversion is approximate because it compares units with different protocols and overhead structures

Frequently Asked Questions

What does IDE (UDMA mode 2) represent?: IDE (UDMA mode 2) is an Ultra DMA transfer mode for Parallel ATA interfaces that provides a theoretical maximum transfer rate of about 33.3 megabytes per second.
What is T1C (payload)?: T1C (payload) refers to the user-data portion of a T1 digital carrier after framing and control overhead are removed, typically about 1.536 Mbps for a standard T1 line.
Why might the conversion between IDE (UDMA mode 2) and T1C (payload) be approximate?: Because these units measure data transfer differently, with differing protocols, overhead, and units (megabytes per second vs. Mbps), the conversion cannot be exact.

Key Terminology

IDE (UDMA mode 2): An Ultra DMA transfer mode for Parallel ATA interfaces providing about 33.3 MB/s theoretical transfer speed, used to configure legacy PC hardware.
T1C (payload): The portion of a T1 digital carrier's bandwidth available for user data after removing framing and control overhead, typically around 1.536 Mbps.
Framing Overhead: Data packets used for synchronization and control in telecommunications links that are not part of the user payload.

Quick Knowledge Check

What is the maximum theoretical transfer rate of IDE (UDMA mode 2)?

Approximately 1.536 Mbps

Approximately 33.3 megabytes per second

Approximately 64 kbps

What does T1C (payload) exclude from its measurement?

User-data channels

Framing and control overhead

ATA/33 transfer modes

Why is the conversion between IDE (UDMA mode 2) and T1C (payload) not exact?

Differences in converter interfaces

Differences in unit protocols and overhead

Difference in color codes

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter