What does IDE (UDMA mode 2) represent?

IDE (UDMA mode 2) is an Ultra DMA transfer mode used in legacy Parallel ATA interfaces, offering a theoretical maximum transfer rate of about 33.3 megabytes per second.

What is the meaning of T1 (payload)?

T1 (payload) indicates the user-data throughput of a North American T1 line, delivering 1.536 megabits per second across 24 channels of 64 kbps each, excluding framing overhead.

Why convert IDE (UDMA mode 2) to T1 (payload)?

Converting helps compare legacy hard drive data speeds with telecommunications payload capacities, which assists in benchmarking and integrated system bandwidth planning.

How to Convert from IDE (UDMA mode 2) to T1 (payload)?

Convert legacy data transfer rates from IDE (UDMA mode 2) to T1 (payload) bandwidth with ease for integrated system design and benchmarking.

IDE (UDMA mode 2)

T1 (payload)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 2) to T1 (payload) Conversion Table

IDE (UDMA mode 2)	T1 (payload)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 2) to T1 (payload) Conversion Table
IDE (UDMA mode 2)	T1 (payload)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter transforms data transfer rates measured in IDE (UDMA mode 2), a legacy Parallel ATA transfer mode, into T1 (payload) bandwidth units used in North American telecommunications. It aids in comparing computer storage speeds with telephony payload capacity.

How to Use This Tool?

Enter a value in IDE (UDMA mode 2) units representing the data transfer rate
Select T1 (payload) as the target unit for conversion
Click convert to see the equivalent T1 (payload) throughput
Use the results to compare or plan bandwidth between PC drive interfaces and telecom channels

Key Features

Converts data transfer rates from IDE (UDMA mode 2) to T1 (payload) units
Based on theoretical maximum transfer capacities
Useful for legacy computing and telecommunications comparison
Supports planning and benchmarking across different technologies
Browser-based and easy to use

Examples

1 IDE (UDMA mode 2) equals approximately 196.43 T1 (payload)
2 IDE (UDMA mode 2) are about 392.86 T1 (payload)

Common Use Cases

Configuring legacy PC BIOS or drive-controller settings for ATA/33 transfer performance
Comparing disk throughput data with telecommunications channel capacity
Troubleshooting PATA device compatibility and firmware issues
Planning PBX trunk capacity using T1 payload bandwidth equivalents
Translating computer transfer speeds into telecom bandwidth for integrated system design

Tips & Best Practices

Use the converter for theoretical comparisons rather than exact real-world throughput
Understand that IDE (UDMA mode 2) applies to older hardware and legacy systems
Remember that T1 (payload) excludes framing overhead impacting gross line rates
Combine conversions with contextual knowledge of system architecture for accurate planning

Limitations

Conversion reflects theoretical maximum transfer rates only
Does not include real-world overhead or error correction effects
IDE (UDMA mode 2) is a legacy standard with limited current applicability
T1 (payload) excludes framing overhead and differs from gross line rates

Frequently Asked Questions

What does IDE (UDMA mode 2) represent?: IDE (UDMA mode 2) is an Ultra DMA transfer mode used in legacy Parallel ATA interfaces, offering a theoretical maximum transfer rate of about 33.3 megabytes per second.
What is the meaning of T1 (payload)?: T1 (payload) indicates the user-data throughput of a North American T1 line, delivering 1.536 megabits per second across 24 channels of 64 kbps each, excluding framing overhead.
Why convert IDE (UDMA mode 2) to T1 (payload)?: Converting helps compare legacy hard drive data speeds with telecommunications payload capacities, which assists in benchmarking and integrated system bandwidth planning.

Key Terminology

IDE (UDMA mode 2): A transfer mode for Parallel ATA interfaces enabling up to about 33.3 MB/s data throughput used in older PC hard drives and optical drives.
T1 (payload): The usable user-data throughput of a North American T1 line, consisting of 24 voice channels at 64 kbps each, totaling 1.536 Mbps excluding overhead.
Conversion Rate: The factor used to convert IDE (UDMA mode 2) transfer rates to T1 (payload) bandwidth: 1 IDE (UDMA mode 2) equals about 196.43 T1 (payload).

Quick Knowledge Check

What is the approximate maximum transfer rate of IDE (UDMA mode 2)?

1.544 Mbps

33.3 MB/s

64 kbps

How many T1 (payload) units equal 1 IDE (UDMA mode 2)?

33.3

196.43

Which component does T1 (payload) bandwidth exclude?

Framing overhead

User data

Channel count

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter