What does IDE (UDMA mode 2) represent?

IDE (UDMA mode 2) is an Ultra DMA transfer mode for Parallel ATA interfaces, offering a transfer rate of about 33.3 megabytes per second for synchronous data transfers in legacy PC systems.

What is STS48 (signal)?

STS48 is a SONET synchronous optical networking signal providing a transport rate of approximately 2.48832 Gbit/s, used for carrying multiplexed data over optical fiber in telecommunications.

Why convert IDE (UDMA mode 2) to STS48?

Converting from IDE (UDMA mode 2) to STS48 helps compare legacy PATA data transfer rates with modern high-speed optical transport standards, aiding in network planning and performance evaluation.

Can this conversion be used for direct traffic replacement?

No, because IDE (UDMA mode 2) rates are much lower than STS48 capacities, making direct traffic replacement or equivalence impractical.

Is the conversion formula exact in real-world conditions?

The formula is theoretical and does not consider protocol overhead or actual throughput differences.

How to Convert from IDE (UDMA mode 2) to STS48 (signal)?

Easily convert data transfer rates from IDE (UDMA mode 2), a legacy PATA interface mode, to STS48 (signal), a high-capacity SONET optical transport standard. Ideal for comparisons and network planning.

IDE (UDMA mode 2)

STS48 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 2) to STS48 (signal) Conversion Table

IDE (UDMA mode 2)	STS48 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 2) to STS48 (signal) Conversion Table
IDE (UDMA mode 2)	STS48 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter enables data transfer unit conversions from IDE (UDMA mode 2), a legacy Parallel ATA transfer mode, to STS48, a SONET optical signal used in telecommunications. It helps compare lower-rate device capabilities with modern high-speed transport rates.

How to Use This Tool?

Enter the data transfer value in IDE (UDMA mode 2) units
Select IDE (UDMA mode 2) as the source unit
Choose STS48 (signal) as the target unit
Initiate the conversion to view the equivalent STS48 (signal) rate
Use the results to compare or analyze data transfer speeds across technologies

Key Features

Converts data transfer rates between IDE (UDMA mode 2) and STS48 (signal)
Browser-based and user-friendly interface
Supports conversions relevant to legacy PC hardware and telecommunications fields
Provides clear examples illustrating unit conversions
Utilizes a precise conversion factor linking device transfer mode to optical line rates

Examples

1 IDE (UDMA mode 2) equals approximately 0.1061 STS48 (signal)
10 IDE (UDMA mode 2) converts to about 1.06095679 STS48 (signal)

Common Use Cases

Comparing legacy PATA interface data rates to modern high-speed optical transport signals
Network planning and performance assessment involving both old and new technologies
Diagnosing and understanding legacy hardware throughput within telecommunications contexts
Evaluating data center interconnect capacities relative to device transfer modes

Tips & Best Practices

Ensure accurate input values for reliable conversions
Use the conversion as an analytical tool rather than a direct traffic equivalence measure
Consider the context of protocol overhead and effective throughput when interpreting results
Employ the tool to support planning involving mixed legacy and modern equipment

Limitations

IDE (UDMA mode 2) speeds are much lower than STS48 signal capacities, making direct equivalence impractical
The conversion is theoretical and does not account for protocol or overhead differences
Effective throughput and real-world performance may vary from the conversion result

Frequently Asked Questions

What does IDE (UDMA mode 2) represent?: IDE (UDMA mode 2) is an Ultra DMA transfer mode for Parallel ATA interfaces, offering a transfer rate of about 33.3 megabytes per second for synchronous data transfers in legacy PC systems.
What is STS48 (signal)?: STS48 is a SONET synchronous optical networking signal providing a transport rate of approximately 2.48832 Gbit/s, used for carrying multiplexed data over optical fiber in telecommunications.
Why convert IDE (UDMA mode 2) to STS48?: Converting from IDE (UDMA mode 2) to STS48 helps compare legacy PATA data transfer rates with modern high-speed optical transport standards, aiding in network planning and performance evaluation.
Can this conversion be used for direct traffic replacement?: No, because IDE (UDMA mode 2) rates are much lower than STS48 capacities, making direct traffic replacement or equivalence impractical.
Is the conversion formula exact in real-world conditions?: The formula is theoretical and does not consider protocol overhead or actual throughput differences.

Key Terminology

IDE (UDMA mode 2): An Ultra DMA transfer mode for Parallel ATA interfaces offering about 33.3 MB/s synchronous data transfer, used in older PC hardware.
STS48 (signal): A SONET signal providing roughly 2.48832 Gbit/s synchronous transport for multiplexed data over optical fibers in telecommunications.
Conversion Rate: The factor used to translate one unit of data transfer into another, here 1 IDE (UDMA mode 2) equals approximately 0.106095679 STS48 (signal).

Quick Knowledge Check

What is the approximate maximum transfer rate of IDE (UDMA mode 2)?

2.48832 Gbit/s

33.3 megabytes per second

51.84 Mbit/s

STS48 signal is primarily used in which field?

Legacy PC BIOS configuration

Telecommunications optical transport

Optical storage drives

Why is direct traffic replacement between IDE (UDMA mode 2) and STS48 impractical?

Because IDE uses fiber optics

Because STS48 has significantly higher capacity

Because both use the same transfer rate

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter