What Is This Tool?
This unit converter translates data transfer rates from OC1, a standard optical carrier transmission rate, to IDE (UDMA mode 2), a legacy PC transfer mode for PATA/IDE interfaces, enabling clear performance comparisons between high-speed network links and older storage interfaces.
How to Use This Tool?
-
Enter the OC1 value to convert from
-
Confirm that your target unit is IDE (UDMA mode 2)
-
Execute the conversion to see the equivalent transfer rate
-
Use examples for guidance on calculation and interpretation
Key Features
-
Converts between OC1 optical carrier rates and IDE (UDMA mode 2) transfer modes
-
Supports understanding of bandwidth relations between network and storage technologies
-
Provides practical examples for quick reference
-
Browser-based and easy to use
Examples
-
1 OC1 equals approximately 0.1964 IDE (UDMA mode 2)
-
5 OC1 converts to about 0.9818 IDE (UDMA mode 2)
Common Use Cases
-
Provisioning carrier-grade fiber circuits by comparing OC1 rates with legacy PC interfaces
-
Evaluating performance of PATA/IDE drives against modern optical network speeds
-
Troubleshooting and diagnosing setup issues in mixed legacy and modern IT environments
Tips & Best Practices
-
Always consider the difference in units: megabits per second (OC1) versus megabytes per second (IDE UDMA 2)
-
Use conversions to understand system compatibility between network and storage devices
-
Apply conversion results carefully when analyzing benchmark or throughput data
Limitations
-
Conversion involves different units (bits vs bytes) requiring careful context understanding
-
Theoretical maximum transfer rates may not reflect actual hardware performance
-
OC1 line rate assumes ideal continuous transmission, excluding network protocol overhead
Frequently Asked Questions
-
What does OC1 represent in data transfer?
-
OC1 is a base SONET optical transmission rate of 51.84 megabits per second used in synchronous optical networking for high-capacity fiber links.
-
What is IDE (UDMA mode 2) used for?
-
IDE (UDMA mode 2), also known as ATA/33, is a transfer mode for legacy Parallel ATA interfaces with a maximum theoretical speed near 33.3 megabytes per second.
-
Why convert OC1 to IDE (UDMA mode 2)?
-
Conversion helps relate high-speed network transfer rates to legacy PC storage speeds for performance comparison and troubleshooting.
Key Terminology
-
OC1
-
An optical carrier transmission rate of 51.84 megabits per second used in synchronous optical networking.
-
IDE (UDMA mode 2)
-
An Ultra DMA transfer mode for legacy PATA/IDE interfaces offering about 33.3 megabytes per second transfer speed.
-
Conversion Rate
-
The fixed value of 1 OC1 equaling approximately 0.1964 IDE (UDMA mode 2) used to convert between the two units.