What does SCSI (Ultra-2) represent?

SCSI (Ultra-2) is a parallel Small Computer System Interface standard using Low Voltage Differential signaling to improve data transfer and cable length for block storage and peripherals.

What is OC1 used for?

OC1 is the base Optical Carrier level in SONET networks, transmitting data at 51.84 Mbit/s and forming the foundation for higher-capacity optical trunk lines.

Why convert between SCSI (Ultra-2) and OC1?

Conversion helps assess compatibility between storage interface speeds and optical transmission rates for network provisioning and integration.

How to Convert from SCSI (Ultra-2) to OC1?

Convert data transfer rates from SCSI (Ultra-2), a parallel storage interface, to OC1, an optical carrier level used in SONET networks. Understand the use cases, key features, and guidelines for conversion between these units.

SCSI (Ultra-2)

OC1

Please check your input. It must be a valid numeric value.

SCSI (Ultra-2) to OC1 Conversion Table

SCSI (Ultra-2)	OC1

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (Ultra-2) to OC1 Conversion Table
SCSI (Ultra-2)	OC1

Explore More Data Transfer Units Converter

What Is This Tool?

This unit converter translates data transfer rates from SCSI (Ultra-2), a parallel Small Computer System Interface standard, into OC1 optical transmission rates used in synchronous optical networking. It helps users relate storage interface speeds to optical carrier speeds.

How to Use This Tool?

Enter the value in SCSI (Ultra-2) units that you want to convert.
Select SCSI (Ultra-2) as the input unit and OC1 as the output unit.
Click the convert button to get the equivalent value in OC1 optical carrier units.

Key Features

Converts data transfer rates between SCSI (Ultra-2) and OC1 units with a defined conversion factor.
Supports measurements relevant to data centers, telecommunications, and enterprise storage networking.
Browser-based and easy to use without installation.
Facilitates planning for compatibility between parallel SCSI storage devices and optical communication channels.

Examples

1 SCSI (Ultra-2) equals approximately 12.3456790123 OC1.
5 SCSI (Ultra-2) converts to 61.7283950615 OC1 by multiplying by the conversion factor.

Common Use Cases

Connecting enterprise disk arrays and RAID controllers to servers for block storage using SCSI (Ultra-2).
Provisioning fiber circuits between service providers and enterprises with OC1 optical carrier rates.
Assessing compatibility between parallel storage interfaces and optical network backbones in data centers.

Tips & Best Practices

Use this tool primarily for theoretical planning and network design purposes.
Consider protocol and environmental factors separately as they may affect actual throughput.
Cross-check conversions in multi-step network provisioning to ensure integration consistency.

Limitations

Conversion is based on nominal standard rates without accounting for protocol overhead.
Variations in signaling methods and interface protocols limit exact data payload equivalence.
Real-world factors such as equipment setup and cable quality influence actual transfer performance.

Frequently Asked Questions

What does SCSI (Ultra-2) represent?: SCSI (Ultra-2) is a parallel Small Computer System Interface standard using Low Voltage Differential signaling to improve data transfer and cable length for block storage and peripherals.
What is OC1 used for?: OC1 is the base Optical Carrier level in SONET networks, transmitting data at 51.84 Mbit/s and forming the foundation for higher-capacity optical trunk lines.
Why convert between SCSI (Ultra-2) and OC1?: Conversion helps assess compatibility between storage interface speeds and optical transmission rates for network provisioning and integration.

Key Terminology

SCSI (Ultra-2): A parallel Small Computer System Interface standard with Low Voltage Differential signaling used for high-performance storage peripherals.
OC1: The base Optical Carrier level in SONET networks with a data rate of 51.84 Mbit/s, serving as a building block for higher-capacity optical transmissions.
SONET: Synchronous Optical Network, a standardized protocol for optical communications that uses OC levels for transmission rates.

Quick Knowledge Check

What type of signaling does SCSI (Ultra-2) use?

Single-ended signaling

Low Voltage Differential (LVD) signaling

Optical signaling

What is the approximate OC1 transmission rate?

1.5 megabits per second

51.84 megabits per second

155 megabits per second

In which environments is converting SCSI (Ultra-2) to OC1 most applicable?

Home media streaming

Data centers and telecommunications

Mobile device networking

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter