What does modem (28.8k) represent?

Modem (28.8k) is an informal label for a data transfer rate of approximately 28,800 bits per second, typical of a 28.8k dial-up analog telephone line connection.

What is SCSI (Ultra-2) used for?

SCSI (Ultra-2) is a parallel interface standard used mostly for connecting enterprise disk arrays, RAID controllers, tape drives, and legacy high-performance computing peripherals.

Can I use this conversion for practical hardware interfacing?

No, the conversion is theoretical and intended for comparison purposes only, as the two units correspond to very different technologies and data transfer methods.

How to Convert from Modem (28.8k) to SCSI (Ultra-2)?

Learn how to convert data transfer rates from the legacy modem (28.8k) unit to the modern SCSI (Ultra-2) interface using this easy-to-use online unit converter. Understand the differences and use cases for each standard.

Modem (28.8k)

SCSI (Ultra-2)

Please check your input. It must be a valid numeric value.

Modem (28.8k) to SCSI (Ultra-2) Conversion Table

Modem (28.8k)	SCSI (Ultra-2)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Modem (28.8k) to SCSI (Ultra-2) Conversion Table
Modem (28.8k)	SCSI (Ultra-2)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to translate data transfer rates from a modem (28.8k), representing analog dial-up speeds, into the SCSI (Ultra-2) unit used in parallel storage device interfaces. It helps compare vastly different data-transfer technologies within telecommunications and data storage fields.

How to Use This Tool?

Enter the value in modem (28.8k) units you want to convert
Select SCSI (Ultra-2) as the target unit
Review the converted result displayed instantly
Use the conversion to compare performance metrics across different data-transfer standards

Key Features

Converts data transfer rates from modem (28.8k) units to SCSI (Ultra-2)
Supports comparison of legacy dial-up modem speeds with modern high-performance storage interfaces
Provides clear numerical conversion based on established conversion rates
Browser-based and easy to use without requiring additional software

Examples

2 modem (28.8k) equals 0.00009 SCSI (Ultra-2)
100 modem (28.8k) equals 0.0045 SCSI (Ultra-2)

Common Use Cases

Estimating download time and legacy modem throughput for classic dial-up connections
Comparing old modem speeds with modern parallel SCSI interfaces for IT infrastructure assessments
Evaluating data transfer performance differences between analog telephone lines and enterprise storage networks
Supporting telecommunications legacy analysis and data center equipment integration reviews

Tips & Best Practices

Use this conversion primarily for comparative analysis rather than real-world interoperability
Consider the different technological contexts when interpreting conversion results
Keep in mind the impact of signal quality on modem data transfer rates, which do not affect SCSI (Ultra-2)
Apply the tool to gain insights into performance gaps rather than direct device compatibility

Limitations

The conversion is theoretical and mainly for comparison since modem (28.8k) and SCSI (Ultra-2) reflect different technologies
Direct substitution or practical interoperability between these two interfaces is not possible
Modem speeds depend on analog signal quality and line noise, factors not relevant to SCSI (Ultra-2)
Do not expect to convert device performance or behavior beyond the numerical rate translation

Frequently Asked Questions

What does modem (28.8k) represent?: Modem (28.8k) is an informal label for a data transfer rate of approximately 28,800 bits per second, typical of a 28.8k dial-up analog telephone line connection.
What is SCSI (Ultra-2) used for?: SCSI (Ultra-2) is a parallel interface standard used mostly for connecting enterprise disk arrays, RAID controllers, tape drives, and legacy high-performance computing peripherals.
Can I use this conversion for practical hardware interfacing?: No, the conversion is theoretical and intended for comparison purposes only, as the two units correspond to very different technologies and data transfer methods.

Key Terminology

Modem (28.8k): A data transfer rate measuring approximately 28.8 kilobits per second over analog telephone lines, used in classic dial-up modems.
SCSI (Ultra-2): A parallel Small Computer System Interface standard using Low Voltage Differential signaling for high-speed data transfers in enterprise storage and peripherals.
Data Transfer Rate: A measurement of how many bits of data can be moved per second between devices or across networks.

Quick Knowledge Check

What type of connection does modem (28.8k) data transfer rate describe?

High-speed enterprise storage interface

Analog telephone line dial-up connection

Parallel device-level interface

Which use case fits SCSI (Ultra-2)?

Estimating web page download times on dial-up

Connecting tape backup drives in data centers

Analyzing telephone line noise impact

What is a limitation of converting modem (28.8k) to SCSI (Ultra-2)?

It provides exact hardware compatibility

Conversion is theoretical and for comparison only

It accounts for signal noise on both interfaces

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter