What does SCSI (Ultra-2) represent?

SCSI (Ultra-2) is a parallel Small Computer System Interface standard that uses Low Voltage Differential signaling for higher data-transfer performance and longer cable lengths.

What is Virtual Tributary 2 (VT2)?

Virtual Tributary 2 is a SONET/SDH sub-rate signal format carrying a 2.048 Mbps payload, used to multiplex lower-rate PDH circuits into higher-rate containers.

Why convert from SCSI (Ultra-2) to VT2 signals?

Conversion allows translation of block-storage device data rates into telecom signal rates, supporting integration of data center storage with SONET/SDH telecommunications infrastructure.

How to Convert from SCSI (Ultra-2) to Virtual Tributary 2 (signal)?

Learn how to convert data transfer rates from SCSI (Ultra-2) to Virtual Tributary 2 (VT2) signal format, enabling integration between data storage interfaces and telecom signal systems.

SCSI (Ultra-2)

Virtual Tributary 2 (signal)

Please check your input. It must be a valid numeric value.

SCSI (Ultra-2) to Virtual Tributary 2 (signal) Conversion Table

SCSI (Ultra-2)	Virtual Tributary 2 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (Ultra-2) to Virtual Tributary 2 (signal) Conversion Table
SCSI (Ultra-2)	Virtual Tributary 2 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter facilitates the translation of data transfer units from SCSI (Ultra-2), a parallel storage interface standard, into Virtual Tributary 2 (VT2), a SONET/SDH signal format used in telecommunications.

How to Use This Tool?

Enter the value in SCSI (Ultra-2) units you want to convert
Select the target unit as Virtual Tributary 2 (signal)
Click the convert button to receive the equivalent VT2 signal units

Key Features

Converts data transfer rates from SCSI (Ultra-2) to Virtual Tributary 2 signals
Supports integration between enterprise storage and telecom network channels
Provides a browser-based, user-friendly interface
Outputs conversions based on a defined rate of 1 SCSI (Ultra-2) equals 277.7777777778 VT2 signals

Examples

1 SCSI (Ultra-2) equals approximately 277.78 Virtual Tributary 2 (signal)
0.5 SCSI (Ultra-2) converts to about 138.89 Virtual Tributary 2 (signal)

Common Use Cases

Connecting enterprise disk arrays and RAID controllers to servers for block storage
Attaching tape backup drives and removable-media libraries in data centers
Transporting E1 circuits over SONET backbones in telecommunications
Configuring SONET multiplexers or digital cross-connects for lower-rate PDH channels
Facilitating interoperability between data center storage interfaces and telecom channel provisioning

Tips & Best Practices

Ensure proper hardware or gateway support when converting between physical signaling formats
Verify that signal rates correspond consistently to avoid inaccuracies
Use this tool to assist in capacity planning for telecom and data storage networks

Limitations

Conversion assumes steady signal rates and does not include any protocol overhead
Physical layer or signaling differences may limit direct interoperability despite matched data rates
Effective conversion requires suitable devices or gateways bridging SCSI and VT2 formats

Frequently Asked Questions

What does SCSI (Ultra-2) represent?: SCSI (Ultra-2) is a parallel Small Computer System Interface standard that uses Low Voltage Differential signaling for higher data-transfer performance and longer cable lengths.
What is Virtual Tributary 2 (VT2)?: Virtual Tributary 2 is a SONET/SDH sub-rate signal format carrying a 2.048 Mbps payload, used to multiplex lower-rate PDH circuits into higher-rate containers.
Why convert from SCSI (Ultra-2) to VT2 signals?: Conversion allows translation of block-storage device data rates into telecom signal rates, supporting integration of data center storage with SONET/SDH telecommunications infrastructure.

Key Terminology

SCSI (Ultra-2): A parallel SCSI standard using Low Voltage Differential signaling for enhanced data transfer and cable length.
Virtual Tributary 2 (VT2): A SONET/SDH sub-rate signal carrying a 2.048 Mbps payload, used to multiplex lower-rate PDH circuits.
SONET/SDH: Synchronous Optical Network / Synchronous Digital Hierarchy, telecommunications standards for optical transport.

Quick Knowledge Check

What type of signaling does SCSI (Ultra-2) utilize?

Single-ended signaling

Low Voltage Differential signaling

Optical signaling

VT2 signals carry which type of payload?

1.544 Mbps T1 channel

2.048 Mbps E1 channel

10 Gbps Ethernet frame

What is a common use for converting SCSI (Ultra-2) to VT2?

To improve cable length in storage networks

To integrate block storage data rates with telecom SONET systems

To upgrade legacy networks to fiber optics

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter