What Is This Tool?
This unit converter helps translate data transfer speeds from IDE (UDMA mode 2), a legacy disk interface mode, into equivalent Fast Ethernet rates, facilitating comparisons between storage and network transfer capabilities.
How to Use This Tool?
-
Enter the quantity in IDE (UDMA mode 2) units you want to convert.
-
Select IDE (UDMA mode 2) as the source unit and Ethernet (fast) as the target unit.
-
Execute the conversion to obtain the equivalent data rate in Fast Ethernet units.
Key Features
-
Converts data rates from IDE (UDMA mode 2) to Fast Ethernet using a predefined conversion factor.
-
Supports comparisons between legacy PATA disk performance and modern networking speeds.
-
Provides a straightforward browser-based interface for quick data transfer unit conversions.
Examples
-
1 IDE (UDMA mode 2) equals 2.64 Ethernet (fast).
-
2 IDE (UDMA mode 2) equals 5.28 Ethernet (fast).
Common Use Cases
-
Configuring or identifying legacy PC BIOS settings to enable ATA/33 transfer rates.
-
Comparing legacy disk throughput with modern network interface speeds.
-
Troubleshooting legacy hardware and driver compatibility in PATA systems.
-
Planning network designs in small office or industrial environments where Fast Ethernet is used.
Tips & Best Practices
-
Use the converter to assess performance differences between disk and network technologies.
-
Keep in mind this conversion reflects theoretical maximum speeds, not real-world throughput.
-
Apply conversions carefully when analyzing legacy hardware alongside modern networking equipment.
Limitations
-
The conversion reflects ideal maximum transfer rates and ignores overhead or inefficiencies.
-
Real data transfer speeds can be lower due to protocol or environmental factors.
Frequently Asked Questions
-
What does IDE (UDMA mode 2) represent?
-
It is a legacy Ultra DMA transfer mode for Parallel ATA interfaces, offering about 33.3 megabytes per second maximum transfer rate.
-
What is Fast Ethernet?
-
Fast Ethernet refers to IEEE 802.3 standards providing 100 megabits per second, commonly used in small LANs over twisted-pair or fiber cables.
-
Why convert IDE (UDMA mode 2) to Ethernet (fast)?
-
To compare data transfer speeds between older disk technologies and modern network interfaces for performance evaluation and integration.
Key Terminology
-
IDE (UDMA mode 2)
-
A transfer mode for Parallel ATA interfaces providing about 33.3 MB/s maximum data rate for legacy drives.
-
Fast Ethernet
-
An IEEE 802.3 Ethernet standard offering 100 megabits per second data transfer over twisted-pair or fiber cables.
-
ATA/33
-
Another name for IDE (UDMA mode 2), indicating a maximum transfer rate of approximately 33 MB/s.