What is the conversion rate between STS48 and STS3c signals?

1 STS48 (signal) equals 16 STS3c (signal) units according to the fixed conversion rate.

What does STS3c represent in SONET?

STS3c is a concatenated SONET electrical transport signal combining three STS-1 channels to carry high-bandwidth streams as a single contiguous payload.

Where is STS48 typically used?

STS48 is used for high-capacity backbone links in telecommunications, including metro and long-haul networks and data center interconnects.

How to Convert from STS48 (signal) to STS3c (signal)?

Learn how to convert high-capacity SONET signals from STS48 (signal) to STS3c (signal) for efficient data transport, grooming, and network provisioning in telecommunications.

STS48 (signal)

STS3c (signal)

Please check your input. It must be a valid numeric value.

STS48 (signal) to STS3c (signal) Conversion Table

STS48 (signal)	STS3c (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

STS48 (signal) to STS3c (signal) Conversion Table
STS48 (signal)	STS3c (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter helps transform data transfer signals from STS48 (signal) to STS3c (signal), facilitating the breakdown of large synchronous optical networking streams into smaller concatenated payloads suitable for telecom backbone circuits.

How to Use This Tool?

Enter the value in STS48 (signal) that you want to convert
Select STS48 (signal) as the input unit and STS3c (signal) as the output unit
Click the convert button to see the result displayed in STS3c (signal)
Use the output for provisioning or network planning purposes

Key Features

Converts from high-capacity STS48 (signal) to smaller STS3c (signal) units
Supports SONET signal level conversions for telecommunications networks
Browser-based and easy-to-use interface for quick conversions
Uses a fixed conversion rate of 1 STS48 equals 16 STS3c signals
Ideal for telecom carriers, data centers, and optical network provisioning

Examples

Converting 1 STS48 (signal) results in 16 STS3c (signal)
Converting 3 STS48 (signal) results in 48 STS3c (signal)

Common Use Cases

Carrier long-haul and metro backbone links carrying aggregated traffic
High-capacity interconnections between core routers or large data centers
Transporting and grooming multiple lower-rate circuits like Ethernet, ATM, or TDM
Provisioning 155.52 Mbps backbone or leased-line circuits using STS3c
Interconnecting metro and backhaul SONET equipment for aggregated network traffic

Tips & Best Practices

Use the converter to simplify network traffic management by breaking down large SONET signals
Ensure hardware compatibility when converting from optical to electrical SONET signals
Incorporate the converted STS3c signals for efficient Ethernet or Packet-over-SONET transport
Remember that real-world throughput can be affected by overhead and protocol variations
Use the tool for planning and provisioning rather than direct physical layer measurements

Limitations

Conversion assumes ideal synchronous SONET framing without overhead or impairments
Real deployments might have overhead bytes and protocol differences impacting throughput
STS3c signals are electrical and require suitable hardware for conversion from optical STS48 signals

Frequently Asked Questions

What is the conversion rate between STS48 and STS3c signals?: 1 STS48 (signal) equals 16 STS3c (signal) units according to the fixed conversion rate.
What does STS3c represent in SONET?: STS3c is a concatenated SONET electrical transport signal combining three STS-1 channels to carry high-bandwidth streams as a single contiguous payload.
Where is STS48 typically used?: STS48 is used for high-capacity backbone links in telecommunications, including metro and long-haul networks and data center interconnects.

Key Terminology

STS48 (signal): A SONET signal level equivalent to OC-48, providing a synchronous transport rate of 2.48832 Gbit/s for carrying multiplexed digital payloads over optical fiber.
STS3c (signal): A concatenated SONET electrical transport signal formed by joining three STS-1 channels, used for high-bandwidth streams with a data rate of 155.52 Mbit/s.
SONET: Synchronous Optical NETworking, a standardized digital communication protocol for transmitting data over optical fiber.

Quick Knowledge Check

What is the fixed conversion rate from STS48 to STS3c?

1 STS48 = 8 STS3c

1 STS48 = 16 STS3c

1 STS48 = 32 STS3c

What type of signal is STS3c?

Optical concatenated signal

Electrical concatenated SONET signal

Analog multiplexed signal

Which use case applies to STS48 signals?

Single low-rate circuit transport

High-capacity interconnection between routers

Single-channel residential internet

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter