What does IDE (PIO mode 4) represent?

IDE (PIO mode 4) is a legacy programmed input/output timing mode for ATA/IDE drives where the CPU controls data transfers with a theoretical max throughput of about 16.7 MB/s.

What is an STS48 (signal)?

STS48 (signal) is a SONET synchronous optical transport signal with a rate around 2.48832 Gbit/s used in telecom networks for high-capacity data transport.

Why convert from IDE (PIO mode 4) to STS48 (signal)?

Users convert to compare older CPU-driven storage transfer rates with modern optical network speeds, aiding in network planning and legacy equipment integration.

How to Convert from IDE (PIO mode 4) to STS48 (signal)

Convert data transfer rates from IDE (PIO mode 4), a legacy CPU-driven storage interface, to STS48 (signal), a high-capacity synchronous optical networking signal, for IT and telecom applications.

IDE (PIO mode 4)

STS48 (signal)

Please check your input. It must be a valid numeric value.

IDE (PIO mode 4) to STS48 (signal) Conversion Table

IDE (PIO mode 4)	STS48 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (PIO mode 4) to STS48 (signal) Conversion Table
IDE (PIO mode 4)	STS48 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter transforms data throughput values from IDE (PIO mode 4), a legacy ATA storage transfer timing mode, into STS48 (signal), a modern SONET optical transport signal level used for high-speed telecommunications.

How to Use This Tool?

Enter the data transfer rate value in IDE (PIO mode 4) units
Choose IDE (PIO mode 4) as the input unit and STS48 (signal) as the output unit
Click convert to see the corresponding STS48 (signal) value
Use the results to compare legacy storage interface throughput with modern optical transport rates

Key Features

Converts transfer rates between legacy IDE PIO mode 4 and STS48 SONET signal format
Suitable for assessing and comparing data rates in IT and telecom infrastructure
Easy to use with clear input and output units
Browser-based and accessible for network planning and legacy system analysis

Examples

1 IDE (PIO mode 4) equals approximately 0.0533693416 STS48 (signal)
10 IDE (PIO mode 4) converts to about 0.533693416 STS48 (signal)

Common Use Cases

Benchmarking legacy IDE/ATA storage devices against telecommunications signals
Planning network upgrades that involve integrating older storage equipment with modern optical networks
Diagnosing and configuring legacy PC or embedded system BIOS and driver settings
Designing carrier backbone links and metro network transport layers
Evaluating transport and grooming capacities for multiple lower-rate data circuits

Tips & Best Practices

Consider that IDE (PIO mode 4) involves CPU-dependent timing rather than fixed physical data rates
Recognize the theoretical nature of this conversion due to differing unit types and transport protocols
Use this conversion as a comparative tool, not a direct unit replacement
Account for protocol overhead and different byte-versus-bit rate interpretations when analyzing results

Limitations

IDE (PIO mode 4) measures a CPU-controlled transfer mode, so throughput may differ in practice
STS48 (signal) is a telecommunications rate and not directly interchangeable with storage interface speeds
Conversion involves different measurement units, requiring careful interpretation
Results represent theoretical equivalences, not guaranteed real-world performance

Frequently Asked Questions

What does IDE (PIO mode 4) represent?: IDE (PIO mode 4) is a legacy programmed input/output timing mode for ATA/IDE drives where the CPU controls data transfers with a theoretical max throughput of about 16.7 MB/s.
What is an STS48 (signal)?: STS48 (signal) is a SONET synchronous optical transport signal with a rate around 2.48832 Gbit/s used in telecom networks for high-capacity data transport.
Why convert from IDE (PIO mode 4) to STS48 (signal)?: Users convert to compare older CPU-driven storage transfer rates with modern optical network speeds, aiding in network planning and legacy equipment integration.

Key Terminology

IDE (PIO mode 4): A CPU-driven ATA storage timing mode with a max theoretical throughput near 16.7 MB/s, defining data transfer handshaking.
STS48 (signal): A SONET synchronous optical transport signal with a data rate of about 2.48832 Gbit/s used for telecom backbone transport.
Conversion Rate: The calculated factor to convert 1 IDE (PIO mode 4) to approximately 0.0533693416 STS48 (signal).

Quick Knowledge Check

IDE (PIO mode 4) transfer rate is primarily controlled by:

An optical fiber interface

The CPU directly

A synchronous transport signal

STS48 (signal) corresponds most closely to which of the following?

Legacy ATA timing mode

A SONET optical networking signal

A USB data transfer standard

What is a key limitation of converting IDE (PIO mode 4) to STS48 (signal)?

They use the same physical units

The conversion is theoretical and units differ

They both measure CPU-controlled transfers

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter