What does IDE (PIO mode 4) represent in data transfer?

IDE (PIO mode 4) is a CPU-driven transfer timing mode for ATA/IDE devices with a maximum theoretical throughput around 16.7 MB/s, used mainly in legacy systems.

What is special about SCSI (LVD Ultra80)?

SCSI (LVD Ultra80) is a Low Voltage Differential interface variant supporting up to 80 MB/s over a 16-bit wide bus, with improved cable length and noise immunity compared to single-ended SCSI.

Why convert data transfer rates between these two units?

Converting helps assess performance improvements, benchmark storage devices, and ensure compatibility when transitioning between legacy CPU-driven IDE and faster synchronous SCSI storage systems.

How to Convert from IDE (PIO mode 4) to SCSI (LVD Ultra80)

Learn how to convert data transfer rates from IDE (PIO mode 4) to SCSI (LVD Ultra80) using a simple online unit converter. Compare performance of legacy and modern storage interfaces with ease.

IDE (PIO mode 4)

SCSI (LVD Ultra80)

Please check your input. It must be a valid numeric value.

IDE (PIO mode 4) to SCSI (LVD Ultra80) Conversion Table

IDE (PIO mode 4)	SCSI (LVD Ultra80)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (PIO mode 4) to SCSI (LVD Ultra80) Conversion Table
IDE (PIO mode 4)	SCSI (LVD Ultra80)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows users to translate data transfer rates between IDE (PIO mode 4), a legacy CPU-driven storage timing mode, and SCSI (LVD Ultra80), a higher-performance SCSI interface used in enterprise storage. It helps compare and benchmark storage technologies across different standards.

How to Use This Tool?

Enter the value you wish to convert from IDE (PIO mode 4) data transfer rate
Select IDE (PIO mode 4) as the source unit
Choose SCSI (LVD Ultra80) as the target unit
Click convert to get the equivalent rate in SCSI (LVD Ultra80)
Use results to compare or assess system performance

Key Features

Converts data transfer rates between IDE (PIO mode 4) and SCSI (LVD Ultra80)
Based on established transfer bandwidth equivalences
Useful for benchmarking legacy and enterprise storage systems
Browser-based and easy to use without installation
Supports comparisons for IT, retro-computing, and storage management

Examples

1 IDE (PIO mode 4) equals 0.2075 SCSI (LVD Ultra80)
5 IDE (PIO mode 4) translates to 1.0375 SCSI (LVD Ultra80)

Common Use Cases

Configuring or diagnosing legacy IDE/ATA drives in older PCs and embedded systems
Benchmarking legacy storage devices during system upgrades
Comparing performance between CPU-driven IDE modes and synchronous SCSI interfaces
Managing enterprise storage solutions like RAID arrays, tape backup drives, and SAN storage
Supporting retro-computing and industrial automation environments requiring historical timing modes

Tips & Best Practices

Use the converter to benchmark and evaluate storage device upgrades
Consider hardware and system architecture differences when comparing results
Apply conversions mainly for relative performance assessment, not exact speed equivalence
Use in conjunction with other diagnostic tools for legacy system maintenance
Remember that SCSI (LVD Ultra80) supports higher bandwidth than IDE (PIO mode 4)

Limitations

IDE (PIO mode 4) throughput is limited by older CPU-driven timing constraints
Conversion indicates relative throughput, not direct data volume equivalence
Real transfer speeds depend on hardware overhead, cable quality, and system architecture
SCSI (LVD Ultra80) offers advanced signaling and higher bandwidth not matched by IDE (PIO mode 4)
Idealized rates may differ from real-world performance

Frequently Asked Questions

What does IDE (PIO mode 4) represent in data transfer?: IDE (PIO mode 4) is a CPU-driven transfer timing mode for ATA/IDE devices with a maximum theoretical throughput around 16.7 MB/s, used mainly in legacy systems.
What is special about SCSI (LVD Ultra80)?: SCSI (LVD Ultra80) is a Low Voltage Differential interface variant supporting up to 80 MB/s over a 16-bit wide bus, with improved cable length and noise immunity compared to single-ended SCSI.
Why convert data transfer rates between these two units?: Converting helps assess performance improvements, benchmark storage devices, and ensure compatibility when transitioning between legacy CPU-driven IDE and faster synchronous SCSI storage systems.

Key Terminology

IDE (PIO mode 4): A CPU-driven Programmed Input/Output timing mode for ATA/IDE storage devices with maximum theoretical throughput of about 16.7 MB/s.
SCSI (LVD Ultra80): Low Voltage Differential variant of Ultra2 SCSI offering up to 80 MB/s transfer bandwidth on a 16-bit bus with 40 MHz synchronous transfers.
Data Transfer Rate: The speed at which data moves from one device to another, measured here between different storage interface standards.

Quick Knowledge Check

What type of data transfer mode is IDE (PIO mode 4)?

A low voltage differential SCSI mode

A CPU-controlled ATA timing mode

A fiber channel transfer mode

What is a key characteristic of SCSI (LVD Ultra80)?

It uses asynchronous transfer on a single-ended bus

It transfers up to 80 MB/s over a 16-bit wide bus with synchronous signaling

It is limited by CPU timing like IDE (PIO mode 4)

Why should one use this unit converter tool?

To convert physical storage sizes between devices

To compare data transfer rates between legacy IDE and modern SCSI interfaces

To calculate power consumption of storage devices

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter