What is the equivalence between OC48 and STS48 (signal)?

OC48 and STS48 (signal) share the same data transfer rate of 2.48832 Gbit/s and convert at a 1:1 ratio.

Can I use this conversion for non-SONET equipment?

This conversion assumes SONET-compliant equipment and may not apply correctly to other protocols or equipment.

Where are OC48 and STS48 commonly used?

They are used in telecommunications, including backbone fiber links, metro networks, and data center interconnects for high-capacity transport.

How to Convert from OC48 to STS48 (signal)?

Learn how to convert data transfer units from OC48 to STS48 (signal) for synchronous optical networking. Understand their equivalence, use cases, and conversion details.

OC48

STS48 (signal)

Please check your input. It must be a valid numeric value.

OC48 to STS48 (signal) Conversion Table

OC48	STS48 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

OC48 to STS48 (signal) Conversion Table
OC48	STS48 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter facilitates the conversion between OC48 and STS48 (signal), two synchronous optical networking units with the same data transfer rate. It helps users translate between transmission rate and signal-level framing terminology used in telecommunications.

How to Use This Tool?

Enter the value in OC48 units you wish to convert
Select OC48 as the source unit and STS48 (signal) as the target unit
Click the convert button to see the equivalent STS48 (signal) value

Key Features

Converts OC48 (Optical Carrier 48) to STS48 (signal) at a 1:1 rate
Supports user-friendly input for direct data transfer unit conversion
Provides clarity on equivalent SONET transmission and signal formats

Examples

5 OC48 converts to 5 STS48 (signal)
0.5 OC48 converts to 0.5 STS48 (signal)

Common Use Cases

Backbone fiber links between regional Points-of-Presence or long-haul carrier trunks
ISP uplinks and aggregation links handling large internet traffic volumes
High-capacity interconnects between core routers or large data centers

Tips & Best Practices

Use this tool to align bandwidth specifications with corresponding signal-level channels for network planning
Ensure equipment is SONET compliant for accurate application of these units
Remember that OC48 and STS48 reflect different abstraction layers in transmission and framing

Limitations

OC48 and STS48 represent different abstraction layers even though their rates are equivalent
Conversion does not consider overhead bits or variations from specific protocols
Only applicable to SONET compliant network environments

Frequently Asked Questions

What is the equivalence between OC48 and STS48 (signal)?: OC48 and STS48 (signal) share the same data transfer rate of 2.48832 Gbit/s and convert at a 1:1 ratio.
Can I use this conversion for non-SONET equipment?: This conversion assumes SONET-compliant equipment and may not apply correctly to other protocols or equipment.
Where are OC48 and STS48 commonly used?: They are used in telecommunications, including backbone fiber links, metro networks, and data center interconnects for high-capacity transport.

Key Terminology

OC48: An optical transmission rate of 2.48832 Gbit/s used in synchronous optical networking for high-capacity data transport.
STS48 (signal): A SONET signal equivalent to OC-48 that carries multiplexed digital payloads at a rate of 2.48832 Gbit/s over optical fiber.
SONET: Synchronous Optical NETworking, a standard for optical data transmission using synchronous framing and multiplexing.

Quick Knowledge Check

What is the data transfer rate equivalence between OC48 and STS48 (signal)?

OC48 is double STS48

OC48 equals STS48

OC48 is half of STS48

Which industry primarily uses OC48 and STS48 (signal)?

Telecommunications

Automotive manufacturing

Agriculture

What should users consider about OC48 and STS48 (signal) during conversion?

They differ in abstraction layers

They are totally unrelated

They have different data rates

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter