What does the T4 (signal) data rate represent?

T4 (signal) is a high-order trunk signal in the North American T-carrier system corresponding to approximately 274.176 megabits per second, used historically for long-distance backbone links.

What is OC48 used for in telecommunications?

OC48 is an optical transmission rate in SONET networks at about 2.48832 Gbit/s, used for high-capacity fiber optic backbone links and transport of voice, data, and packet traffic.

Why convert between T4 (signal) and OC48?

Conversion helps map legacy digital signals onto modern optical carrier formats, facilitating network migration, interoperability, and capacity understanding between older PDH and newer SONET systems.

How to Convert from T4 (signal) to OC48?

Learn how to convert data transfer rates from the legacy T4 (signal) format to the modern OC48 optical transmission standard. Understand use cases, examples, and limitations of this conversion for telecom and network engineering purposes.

T4 (signal)

OC48

Please check your input. It must be a valid numeric value.

T4 (signal) to OC48 Conversion Table

T4 (signal)	OC48

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

T4 (signal) to OC48 Conversion Table
T4 (signal)	OC48

Explore More Data Transfer Units Converter

What Is This Tool?

This converter helps you translate data transfer rates from the T4 (signal) standard used in legacy North American T-carrier systems to the OC48 optical transmission rate typical in modern SONET networks. It is designed for telecom professionals and network engineers managing transitions or integrations between older PDH systems and current fiber optic infrastructures.

How to Use This Tool?

Enter the numeric value representing your T4 (signal) data rate.
Select T4 (signal) as the input unit and OC48 as the output unit.
Click convert to see the equivalent OC48 data rate based on the defined conversion rate.

Key Features

Converts data rates from T4 (signal) to OC48 units accurately based on established conversion rates.
Provides straightforward calculation for mapping legacy digital signals to modern optical carrier formats.
Supports understanding of capacity equivalence to aid network migration and equipment interoperability.
Browser-based and easy to use with enter-value, select-units, and convert steps.

Examples

Converting 5 T4 (signal) results in approximately 0.550925926 OC48 units.
Converting 10 T4 (signal) yields about 1.101851852 OC48 units.

Common Use Cases

Mapping legacy T4 (signal) digital carrier signals onto modern high-speed SONET OC48 optical networks.
Understanding data rate equivalence when upgrading or interfacing old T-carrier systems with fiber optic infrastructure.
Supporting telecom network migration efforts between PDH and SONET systems.
Managing multi-protocol carrier networks that integrate legacy and contemporary transport technologies.

Tips & Best Practices

Confirm your network equipment compatibility before using conversion results, as physical interfaces differ between legacy and optical systems.
Use this tool primarily for planning and understanding capacity equivalencies rather than precise physical signal conversions.
Consider the limitations of legacy T4 and the overhead differences not accounted for in the data rate conversion.
Combine this conversion with broader network design analysis during telecom infrastructure transitions.

Limitations

T4 (signal) is largely a legacy format and rarely part of new network deployments.
The conversion does not reflect framing overhead, coding, or signaling differences between T4 and OC48 systems.
Physical interface requirements differ, with OC48 relying on optical fiber technology not present in T4 signal equipment.

Frequently Asked Questions

What does the T4 (signal) data rate represent?: T4 (signal) is a high-order trunk signal in the North American T-carrier system corresponding to approximately 274.176 megabits per second, used historically for long-distance backbone links.
What is OC48 used for in telecommunications?: OC48 is an optical transmission rate in SONET networks at about 2.48832 Gbit/s, used for high-capacity fiber optic backbone links and transport of voice, data, and packet traffic.
Why convert between T4 (signal) and OC48?: Conversion helps map legacy digital signals onto modern optical carrier formats, facilitating network migration, interoperability, and capacity understanding between older PDH and newer SONET systems.

Key Terminology

T4 (signal): A legacy North American T-carrier high-order trunk signal carrying around 274.176 Mbit/s for long-distance telephony backbone.
OC48: A SONET optical transmission rate of 2.48832 Gbit/s used for high-capacity synchronous networking over fiber.
SONET: Synchronous Optical Network, a standardized protocol for transferring multiple digital bit streams over optical fiber.

Quick Knowledge Check

What is the approximate data rate of a T4 (signal)?

2.48832 Gbit/s

274.176 megabits per second

51.84 Mbit/s

What technology does OC48 principally use?

Optical fiber technology

Copper wire technology

Microwave radio links

In which scenario would you convert T4 (signal) to OC48?

To interface legacy T-carrier equipment with modern SONET fiber networks

To measure electrical resistance in circuits

To convert frequency units in radio communications

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter