What Is This Tool?
This converter allows you to translate data transfer rates from T4 (signal), a legacy telecommunications trunk signal, into gigabytes per second (GB/s), a contemporary unit reflecting data throughput for storage and network performance.
How to Use This Tool?
-
Enter the value in T4 (signal) units that you want to convert
-
Select gigabyte per second [GB/s] as the target unit
-
Initiate the conversion with a simple click
-
Review the converted data transfer rate expressed in GB/s
-
Use the resulting value to plan or compare network and storage throughput
Key Features
-
Converts T4 (signal) rates to gigabyte per second units accurately
-
Addresses legacy PDH telecommunications signal rates
-
Facilitates comparison between older telecom speeds and modern data transfer units
-
Provides examples for practical conversions
-
Assumes SI gigabyte units for clarity in data rates
Examples
-
5 T4 (signal) equals approximately 0.1596 GB/s
-
10 T4 (signal) amounts to about 0.3192 GB/s
Common Use Cases
-
Converting legacy T4 signal rates for integration with modern network infrastructures
-
Planning and evaluating legacy carrier trunk capacities in terms of current data transfer units
-
Testing and validating legacy telecommunications multiplexers using contemporary throughput metrics
-
Supporting specialized networks that operate older T-carrier systems alongside modern architectures
Tips & Best Practices
-
Clarify whether SI or binary gigabyte units apply when comparing converted data rates
-
Consider the legacy nature of T4 signals and their fixed rate when planning networks
-
Account for overhead and protocol efficiency, as raw conversions reflect theoretical maxima
-
Use this conversion as a reference when maintaining or interfacing legacy telecom equipment with modern networks
Limitations
-
The T4 (signal) rate is fixed at about 274.176 Mbps and does not adapt to newer telecom standards
-
Conversion assumes SI gigabytes; differences with binary gigabyte units may cause variation
-
T4 standard is largely outdated, replaced in many contexts by SONET/SDH or Ethernet technologies
-
Actual throughput can be lower due to protocol overhead and network inefficiencies
Frequently Asked Questions
-
What does the T4 (signal) unit represent?
-
T4 (signal) is a legacy high-order trunk signal in the North American T-carrier system, corresponding to the DS4 rate at roughly 274.176 megabits per second.
-
How is a gigabyte per second defined in this converter?
-
Gigabyte per second (GB/s) refers to the transfer of one gigabyte of data each second, assuming the SI definition where 1 GB equals 10^9 bytes.
-
Why should I convert T4 (signal) to GB/s?
-
Converting T4 (signal) values into GB/s helps translate legacy telecom rates into modern data transfer units for easier comparison, network planning, and integration with current technology.
Key Terminology
-
T4 (signal)
-
A high-order legacy telecommunications signal in the North American T-carrier hierarchy, carrying data at about 274.176 Mbps.
-
Gigabyte per second (GB/s)
-
A unit of data transfer representing the transmission of one billion bytes per second using the SI byte definition.
-
PDH hierarchy
-
Plesiochronous Digital Hierarchy, a telecommunications standard under which T4 signals operate.