What does IDE (PIO mode 2) mean?

IDE (PIO mode 2) refers to an ATA/IDE interface timing specification that defines signal timing and maximum transfer performance for CPU-driven data transfers between a host and storage devices using programmed input/output cycles.

What is STS48 (signal) used for?

STS48 (signal) is a SONET synchronous transport rate used in telecommunications for high-capacity framed transport channels, commonly utilized in carrier long-haul, metro backbone links, and data center interconnects.

Can I directly connect devices using IDE (PIO mode 2) rates with STS48 networks?

No, this conversion only reflects throughput equivalence; due to fundamental technology and protocol differences, direct interoperability between IDE PIO mode 2 devices and STS48 networks is not possible.

How to Convert from IDE (PIO mode 2) to STS48 (signal)?

Easily convert data transfer rates from IDE (PIO mode 2), a legacy ATA/IDE timing standard, to STS48 (signal), a modern SONET synchronous transport rate, to understand performance differences and telecommunications applications.

IDE (PIO mode 2)

STS48 (signal)

Please check your input. It must be a valid numeric value.

IDE (PIO mode 2) to STS48 (signal) Conversion Table

IDE (PIO mode 2)	STS48 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (PIO mode 2) to STS48 (signal) Conversion Table
IDE (PIO mode 2)	STS48 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter transforms values from IDE (PIO mode 2), an older ATA/IDE interface timing mode used in legacy storage devices, to STS48 (signal), a high-capacity SONET transport standard used in telecommunications networks. It helps translate data transfer rates between vastly different technologies for analysis and comparison.

How to Use This Tool?

Enter the data transfer value measured in IDE (PIO mode 2)
Select IDE (PIO mode 2) as the source unit if not preselected
Choose STS48 (signal) as the target unit
Click convert to obtain the equivalent value in STS48 signals
Review the resulting rate for analysis or integration purposes

Key Features

Converts data transfer rates from IDE (PIO mode 2) to STS48 (signal)
Supports analysis of legacy ATA/IDE timing in terms of modern optical transport capacities
Provides straightforward multiplication-based conversion using an established conversion rate
Browser-based and easy to use without installation
Ideal for users evaluating telecommunications throughput or vintage PC data transfer modes

Examples

10 IDE (PIO mode 2) converts to approximately 0.26685 STS48 (signal)
50 IDE (PIO mode 2) equals about 1.33423 STS48 (signal)

Common Use Cases

Interpreting legacy BIOS or firmware drive timing configurations for old IDE drives
Diagnosing performance or compatibility issues on older PCs when operating in PIO mode
Reading device driver reports indicating IDE transfer modes
Converting legacy ATA/IDE data rates into modern optical network units
Assessing telecommunications backbone and metro link capacities with SONET standards
Planning high-capacity interconnects between routers or data centers using STS48

Tips & Best Practices

Use this tool mainly for analytical comparison rather than direct hardware compatibility
Verify the source data corresponds specifically to IDE (PIO mode 2) transfer rates
Interpret the STS48 conversion as a throughput equivalence in network design
Consider technology and protocol differences between legacy IDE and SONET while analyzing results
Keep in mind the legacy nature of IDE PIO modes limits practical interoperability

Limitations

IDE (PIO mode 2) is a legacy interface with much lower speeds than STS48
Conversion serves analytical purposes, not direct compatibility or interoperability
Differences in technology and protocol layers mean throughput equivalence does not imply functional matching
This converter does not account for specific hardware or firmware behaviors
It focuses solely on converting data rate values, not signaling or electrical characteristics

Frequently Asked Questions

What does IDE (PIO mode 2) mean?: IDE (PIO mode 2) refers to an ATA/IDE interface timing specification that defines signal timing and maximum transfer performance for CPU-driven data transfers between a host and storage devices using programmed input/output cycles.
What is STS48 (signal) used for?: STS48 (signal) is a SONET synchronous transport rate used in telecommunications for high-capacity framed transport channels, commonly utilized in carrier long-haul, metro backbone links, and data center interconnects.
Can I directly connect devices using IDE (PIO mode 2) rates with STS48 networks?: No, this conversion only reflects throughput equivalence; due to fundamental technology and protocol differences, direct interoperability between IDE PIO mode 2 devices and STS48 networks is not possible.

Key Terminology

IDE (PIO mode 2): An ATA/IDE interface timing mode defining CPU-driven data transfers with programmed input/output cycles for legacy storage devices.
STS48 (signal): A SONET signal representing a synchronous transport rate of 2.48832 Gbit/s used for high-capacity optical fiber transport in telecommunications.
PIO (Programmed Input/Output): A method of data transfer where the CPU controls data exchange between memory and an external device.

Quick Knowledge Check

What type of data transfer mode is IDE (PIO mode 2)?

A DMA-driven mode for modern hard drives

A CPU-driven programmed input/output timing specification

A wireless data transfer protocol

STS48 (signal) corresponds to which kind of network technology?

Wireless LAN connections

SONET synchronous optical networking

Bluetooth data transport

Why is converting IDE (PIO mode 2) to STS48 mainly analytical?

Because both use the same hardware protocols

Because of large differences in technology and speed between legacy IDE and STS48

Because it ensures direct compatibility

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter