What does SCSI (Async) represent?

SCSI (Async) indicates the asynchronous data-transfer mode of the Small Computer System Interface protocol, where data exchanges use request/acknowledge handshakes instead of synchronization by a common clock.

What is STS1 (signal) used for?

STS1 (signal) is the basic SONET electrical/frame unit used for synchronous optical networking, providing a line rate of 51.84 megabits per second and serving as a transport container for multiplexing digital signals.

Why is converting between SCSI (Async) and STS1 useful?

Converting between these units helps compare or integrate throughput rates of asynchronous SCSI devices with synchronous SONET transport systems, which is essential for legacy system benchmarking and network interface planning.

How to Convert from SCSI (Async) to STS1 (signal)?

Learn how to convert data transfer rates from SCSI (Async), an asynchronous SCSI protocol mode, to STS1 (signal), the basic SONET electrical frame unit.

SCSI (Async)

STS1 (signal)

Please check your input. It must be a valid numeric value.

SCSI (Async) to STS1 (signal) Conversion Table

SCSI (Async)	STS1 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (Async) to STS1 (signal) Conversion Table
SCSI (Async)	STS1 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter enables you to transform data transfer values measured in SCSI (Async) units into STS1 (signal) units, facilitating comparisons and integrations between asynchronous SCSI throughput and synchronous SONET transport rates.

How to Use This Tool?

Enter the value in SCSI (Async) data transfer units you wish to convert
Select SCSI (Async) as the source unit and STS1 (signal) as the target unit if needed
Click the convert button to get the equivalent STS1 (signal) value
Review example conversions for better understanding
Use results to analyze or plan network and device throughput

Key Features

Converts data transfer rates from SCSI (Async) to STS1 (signal)
Supports legacy SCSI devices and modern SONET systems
Includes specific conversion formula and example calculations
Suitable for benchmarking and network interface planning
Browser-based and user-friendly interface

Examples

5 SCSI (Async) equals approximately 1.1574 STS1 (signal)
10 SCSI (Async) equals approximately 2.3148 STS1 (signal)

Common Use Cases

Benchmarking throughput of legacy SCSI devices operating asynchronously
Troubleshooting timing and compatibility in SCSI bus communications
Configuring systems using asynchronous SCSI connections
Planning optical backbone links using OC‑1/STS‑1 networks
Transporting lower-rate circuits in SONET carrier networks
Provisioning leased lines or dedicated point‑to‑point fiber circuits

Tips & Best Practices

Consider variability in SCSI (Async) rates due to device response and bus arbitration
Account for SONET overhead in STS1 (signal) when evaluating usable bandwidth
Use examples as a reference for typical conversions
Apply this converter primarily in contexts involving legacy and SONET technologies
Cross-check converted values within the framework of network design or benchmarking

Limitations

SCSI (Async) throughput varies, making conversions approximate
STS1 (signal) includes SONET overhead, so payload bandwidth is less
Asynchronous nature of SCSI (Async) causes variable effective throughput not reflected in fixed STS1 rates

Frequently Asked Questions

What does SCSI (Async) represent?: SCSI (Async) indicates the asynchronous data-transfer mode of the Small Computer System Interface protocol, where data exchanges use request/acknowledge handshakes instead of synchronization by a common clock.
What is STS1 (signal) used for?: STS1 (signal) is the basic SONET electrical/frame unit used for synchronous optical networking, providing a line rate of 51.84 megabits per second and serving as a transport container for multiplexing digital signals.
Why is converting between SCSI (Async) and STS1 useful?: Converting between these units helps compare or integrate throughput rates of asynchronous SCSI devices with synchronous SONET transport systems, which is essential for legacy system benchmarking and network interface planning.

Key Terminology

SCSI (Async): Asynchronous data transfer mode in the SCSI protocol using request/acknowledge handshakes rather than a shared clock.
STS1 (signal): Basic SONET electrical frame unit with a line rate of 51.84 Mbps, corresponding to OC‑1 optical carrier and used for synchronous optical networking.
SONET: Synchronous Optical Network standard for multiplexing digital signals into an optical transport hierarchy.

Quick Knowledge Check

What does SCSI (Async) indicate in data transfer?

Synchronous data transfer using a shared clock

Asynchronous mode using request/acknowledge handshakes

Conversion unit for SONET signals

STS1 (signal) corresponds to which SONET optical carrier level?

OC‑3

OC‑1

OC‑12

Which is a limitation of converting SCSI (Async) to STS1 (signal)?

Precise fixed data rates for SCSI devices

Overhead in SONET reducing raw payload bandwidth

Use of shared clock synchronization

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter