What does SCSI (LVD Ultra80) represent?

It is a low voltage differential variant of Ultra2 SCSI providing up to 80 MB/s raw transfer bandwidth using a 16-bit wide bus at 40 MHz synchronous transfer rates.

What is the STS3c (payload) unit?

STS3c (payload) is a SONET synchronous transport signal level-3 payload container providing a contiguous transport channel with a gross line rate of 155.52 Mbps (OC-3) used for high bandwidth client signals.

Why convert from SCSI (LVD Ultra80) to STS3c (payload)?

Such conversions enable integration of legacy SCSI storage bandwidth needs into optical transport networks and assist in mapping storage data rates to SONET circuit capacities.

How to Convert from SCSI (LVD Ultra80) to STS3c (payload)

Learn how to convert data transfer rates from SCSI (LVD Ultra80) to STS3c (payload) using our online unit converter. Understand the uses, examples, and key considerations for effective conversion.

SCSI (LVD Ultra80)

STS3c (payload)

Please check your input. It must be a valid numeric value.

SCSI (LVD Ultra80) to STS3c (payload) Conversion Table

SCSI (LVD Ultra80)	STS3c (payload)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (LVD Ultra80) to STS3c (payload) Conversion Table
SCSI (LVD Ultra80)	STS3c (payload)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter enables users to transform data transfer rates measured in SCSI (LVD Ultra80) units into STS3c (payload) units, assisting in bridging legacy SCSI storage bandwidths with modern optical transport channel capacities.

How to Use This Tool?

Enter the value in SCSI (LVD Ultra80) units that you want to convert.
Select both the source unit (SCSI LVD Ultra80) and the target unit (STS3c payload).
Click the convert button to obtain the equivalent STS3c (payload) value.

Key Features

Converts between SCSI (LVD Ultra80) and STS3c (payload) data transfer units.
Supports integration of legacy SCSI storage systems with SONET-based optical networks.
Provides clear, easy-to-use interface for quick conversions.

Examples

2 SCSI (LVD Ultra80) equals approximately 8.51 STS3c (payload).
0.5 SCSI (LVD Ultra80) is converted to about 2.13 STS3c (payload).

Common Use Cases

Integrating legacy high-speed SCSI storage with modern optical transport networks.
Mapping SCSI storage bandwidth needs to optical circuit capacities in SONET infrastructure.
Enterprise data centers and telecommunications networks bridging SCSI devices to SONET backbones.

Tips & Best Practices

Consider that STS3c payload bandwidth is slightly lower than the gross rate due to protocol overhead.
Use specialized hardware to ensure compatibility when bridging legacy SCSI hardware with optical systems.
Verify conversion results in real-world scenarios accounting for overhead and protocol efficiencies.

Limitations

STS3c (payload) usable bandwidth is less than gross line rate because of SONET framing and overhead bytes.
SCSI (LVD Ultra80) bandwidth reflects raw transfer rates which may differ from effective data throughput.
Interfacing legacy SCSI with modern optical equipment may require additional protocol conversion hardware.

Frequently Asked Questions

What does SCSI (LVD Ultra80) represent?: It is a low voltage differential variant of Ultra2 SCSI providing up to 80 MB/s raw transfer bandwidth using a 16-bit wide bus at 40 MHz synchronous transfer rates.
What is the STS3c (payload) unit?: STS3c (payload) is a SONET synchronous transport signal level-3 payload container providing a contiguous transport channel with a gross line rate of 155.52 Mbps (OC-3) used for high bandwidth client signals.
Why convert from SCSI (LVD Ultra80) to STS3c (payload)?: Such conversions enable integration of legacy SCSI storage bandwidth needs into optical transport networks and assist in mapping storage data rates to SONET circuit capacities.

Key Terminology

SCSI (LVD Ultra80): A Low Voltage Differential SCSI interface variant delivering up to 80 MB/s raw bandwidth over a wide 16-bit bus at 40 MHz synchronous transfers.
STS3c (payload): A concatenated SONET synchronous transport signal level-3 payload providing a single contiguous channel at a gross rate of 155.52 Mbps (OC-3), used for high-bandwidth client signals.
SONET: Synchronous Optical Network standard used for high-speed optical transport and framing of digital signals.

Quick Knowledge Check

What is the primary purpose of converting SCSI (LVD Ultra80) to STS3c (payload)?

To translate optical bandwidth to storage bandwidth

To map legacy SCSI storage bandwidth to optical transport capacities

To increase SCSI bandwidth beyond its maximum

Which technology provides a contiguous transport channel at about 155 Mbps?

SCSI (LVD Ultra80)

STS3c (payload)

Ultra2 SCSI single-ended

What factor reduces the usable bandwidth of STS3c (payload)?

Cable interference

SONET framing and overhead bytes

SCSI bus width limitations

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter