What is SCSI (LVD Ultra80)?

SCSI (LVD Ultra80) is a legacy Low Voltage Differential variant of the Ultra2 SCSI interface offering up to 80 MB/s raw data transfer on a 16-bit wide bus using 40 MHz synchronous transfers.

How does megabyte per second (SI) differ from mebibyte per second?

Megabyte per second (SI) equals 1,000,000 bytes per second, while mebibyte per second uses a binary base of 2^20 bytes. This converter uses the decimal SI definition.

Why convert SCSI (LVD Ultra80) to megabyte per second (SI)?

Converting helps compare legacy SCSI bandwidths to modern data rates expressed in standardized SI units, aiding clearer analysis of performance in mixed hardware environments.

How to Convert from SCSI (LVD Ultra80) to Megabyte/second (SI def.)?

Learn how to convert data transfer rates from the SCSI (LVD Ultra80) unit to megabytes per second using the SI definition. Understand the conversion process, typical use cases, and important considerations for legacy and modern data throughput comparisons.

SCSI (LVD Ultra80)

Megabyte/second (SI def.)

Please check your input. It must be a valid numeric value.

SCSI (LVD Ultra80) to Megabyte/second (SI def.) Conversion Table

SCSI (LVD Ultra80)	Megabyte/second (SI def.)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (LVD Ultra80) to Megabyte/second (SI def.) Conversion Table
SCSI (LVD Ultra80)	Megabyte/second (SI def.)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to change data transfer rates measured in SCSI (LVD Ultra80) units into megabyte per second values based on the SI standard. It provides an easy way to compare legacy SCSI interface bandwidths with modern decimal-based data transfer rates.

How to Use This Tool?

Enter the value representing the SCSI (LVD Ultra80) data transfer rate you want to convert.
Select 'SCSI (LVD Ultra80)' as the input unit and 'megabyte/second (SI def.)' as the output unit.
Click the convert button to see the equivalent data rate in megabytes per second.

Key Features

Converts SCSI (LVD Ultra80) data rates to megabyte/second (SI definition)
Useful for IT professionals working with legacy and modern storage systems
Browser-based and simple to use with instant conversion results
Includes unit definitions and typical use cases for clarity

Examples

1 SCSI (LVD Ultra80) equals 80 megabytes per second (SI).
0.5 SCSI (LVD Ultra80) equals 40 megabytes per second (SI).

Common Use Cases

Evaluating bandwidth for high-performance server disk arrays and external RAID enclosures using legacy SCSI.
Comparing legacy tape backup drives or SAN storage speeds to modern data rates.
Planning migrations between older SCSI-based solutions and current digital storage interfaces.

Tips & Best Practices

Always consider that real-world transfer speeds may be less than the raw bandwidth due to overhead.
Use this conversion primarily to understand legacy device capabilities in SI units.
Verify units and context before applying the conversion to ensure accurate interpretation.

Limitations

The conversion is based on ideal raw bandwidth and does not reflect protocol overhead or real transfer performance.
Relevant mostly for legacy hardware contexts; not applicable to current high-speed interfaces.

Frequently Asked Questions

What is SCSI (LVD Ultra80)?: SCSI (LVD Ultra80) is a legacy Low Voltage Differential variant of the Ultra2 SCSI interface offering up to 80 MB/s raw data transfer on a 16-bit wide bus using 40 MHz synchronous transfers.
How does megabyte per second (SI) differ from mebibyte per second?: Megabyte per second (SI) equals 1,000,000 bytes per second, while mebibyte per second uses a binary base of 2^20 bytes. This converter uses the decimal SI definition.
Why convert SCSI (LVD Ultra80) to megabyte per second (SI)?: Converting helps compare legacy SCSI bandwidths to modern data rates expressed in standardized SI units, aiding clearer analysis of performance in mixed hardware environments.

Key Terminology

SCSI (LVD Ultra80): A Low Voltage Differential variant of the Ultra2 SCSI interface delivering up to 80 megabytes per second raw bandwidth on a wide 16-bit bus using 40 MHz synchronous transfers.
Megabyte per second (SI definition): A data transfer rate defined as 1,000,000 bytes every second, used for quantifying digital throughput with decimal units.

Quick Knowledge Check

What is the equivalent of 1 SCSI (LVD Ultra80) in megabyte per second (SI)?

80,000 bytes per second

80 megabytes per second

1,000,000 bytes per second

Which unit is used in this converter as the target data rate?

Mebibyte per second

Megabyte per second (SI definition)

Gigabit per second

What does this converter primarily help with?

Calculating power usage of devices

Converting legacy SCSI bandwidth to modern speed units

Measuring physical cable lengths

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter