What Is This Tool?
This converter transforms data rates measured in Virtual Tributary 2 (payload), a SONET/SDH virtual container for 2.048 Mb/s PDH/E1 channels, into equivalent bandwidths in SCSI (LVD Ultra80), a high-speed computer storage interface. It helps bridge the gap between legacy telecommunication signals and storage network bandwidth measurements.
How to Use This Tool?
-
Enter the value you want to convert in Virtual Tributary 2 (payload) units
-
Select Virtual Tributary 2 (payload) as the input unit and SCSI (LVD Ultra80) as the output unit
-
Click the convert button to see the equivalent SCSI (LVD Ultra80) value
-
Use the provided examples to verify your conversions if needed
Key Features
-
Converts Virtual Tributary 2 (payload) units into SCSI (LVD Ultra80) units
-
Supports data transfer rate conversions between SONET/SDH and SCSI interfaces
-
Browser-based and easy to use without additional software
-
Provides clear unit definitions and use case guidance
-
Includes example conversions for quick reference
Examples
-
10 Virtual Tributary 2 (payload) units equal 0.032 SCSI (LVD Ultra80)
-
100 Virtual Tributary 2 (payload) units equal 0.32 SCSI (LVD Ultra80)
Common Use Cases
-
Transporting E1 voice or data channels over a SONET/SDH network
-
Assessing performance equivalencies between legacy TDM circuits and SCSI storage interfaces
-
Supporting system integration in telecommunications and data storage environments
-
Comparing bandwidths across different communication and storage protocols
Tips & Best Practices
-
Remember this conversion is theoretical and does not include protocol overhead
-
Use the converter to estimate bandwidth equivalencies, not direct interface compatibility
-
Consider additional hardware or translation layers for actual SCSI and SONET/SDH interoperability
-
Apply this tool for planning and assessment in network engineering contexts
Limitations
-
Does not factor in differences in protocol overhead or framing efficiencies
-
Actual data throughput may vary due to signaling and error correction processes
-
Conversion is theoretical; direct use requires specialized hardware or protocol translators
Frequently Asked Questions
-
What is Virtual Tributary 2 (payload)?
-
It is a SONET/SDH container designed to carry a 2.048 Mb/s PDH/E1 channel, allowing transport of lower-rate signals over optical networks.
-
What does SCSI (LVD Ultra80) refer to?
-
SCSI (LVD Ultra80) is a 16-bit wide SCSI interface variant offering up to 80 MB/s raw transfer speeds with improved noise immunity.
-
Can I directly connect devices using Virtual Tributary 2 and SCSI (LVD Ultra80)?
-
No, this conversion is theoretical; direct connection requires additional hardware or protocol translations.
Key Terminology
-
Virtual Tributary 2 (payload)
-
A SONET/SDH container sized to carry a 2.048 Mb/s PDH/E1 channel for multiplexing lower-rate signals into optical networks.
-
SCSI (LVD Ultra80)
-
A Low Voltage Differential SCSI interface providing up to 80 MB/s on a 16-bit bus with 40 MHz synchronous transfers.
-
SONET/SDH
-
Synchronous Optical Network/Synchronous Digital Hierarchy, protocols for optical fiber transport networks.
-
PDH/E1
-
Plesiochronous Digital Hierarchy E1 channel, a 2.048 Mb/s digital transmission format primarily used in telecommunications.