What is an STS24 signal?

STS24 is a Synchronous Optical Network signal formed by multiplexing 24 STS-1 fibers, delivering a nominal line rate of approximately 1.244 Gbit/s.

Why convert STS24 signals to Virtual Tributary 2 payloads?

Conversion helps break down large, aggregated SONET signals into smaller 2.048 Mb/s channels for detailed provisioning and multiplexing of legacy TDM circuits.

Can I convert fractional VT2 payload units from STS24 signals?

No, since VT2 payload size is fixed, conversions work best in whole multiples of 2.048 Mb/s bandwidth units.

How to Convert from STS24 (signal) to Virtual Tributary 2 (payload)?

Learn how to convert data transfer units from STS24 signal level to Virtual Tributary 2 payload containers, commonly used in SONET/SDH optical networks for efficient multiplexing of legacy TDM channels.

STS24 (signal)

Virtual Tributary 2 (payload)

Please check your input. It must be a valid numeric value.

STS24 (signal) to Virtual Tributary 2 (payload) Conversion Table

STS24 (signal)	Virtual Tributary 2 (payload)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

STS24 (signal) to Virtual Tributary 2 (payload) Conversion Table
STS24 (signal)	Virtual Tributary 2 (payload)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter transforms data transfer measurements from the high-capacity STS24 optical signal format into smaller Virtual Tributary 2 payload units. It supports telecommunications professionals in breaking down aggregated SONET signals for detailed channel provisioning.

How to Use This Tool?

Enter the value in STS24 (signal) units you want to convert.
Select STS24 (signal) as the starting unit.
Choose Virtual Tributary 2 (payload) as the target unit.
Click convert to obtain the equivalent number of VT2 payloads.
Use the resulting values to plan network capacity and channel breakdowns.

Key Features

Converts STS24 (signal) to Virtual Tributary 2 (VT2) payload units.
Provides a precise conversion factor based on SONET multiplexing standards.
Supports planning and management of legacy Time-Division Multiplexing (TDM) circuits.
Useful for granular grooming of low-rate channels within large optical aggregates.
Web-based and easy to use for telecommunications engineers and network planners.

Examples

1 STS24 (signal) converts to 607.5 Virtual Tributary 2 (payload).
2 STS24 (signal) converts to 1215 Virtual Tributary 2 (payload).

Common Use Cases

Breaking down high-capacity SONET backbone signals into E1-sized payload containers.
Supporting multiplexing and grooming of legacy TDM circuits in carrier-grade networks.
Planning transport for voice and data services over SONET/SDH long-haul links.
Circuit emulation and PDH-to-SONET conversions in data centers and central offices.
Managing mixed-rate circuit aggregation in metro and optical backbone infrastructures.

Tips & Best Practices

Always verify the conversion matches your network’s payload design and overhead considerations.
Use the tool to assist with capacity planning especially when supporting legacy TDM services.
Remember that the Virtual Tributary 2 payload size is fixed at 2.048 Mb/s per channel.
Consider the SONET overhead which slightly reduces usable capacity from nominal rates.
Utilize results to optimize granular provisioning within large SONET optical frames.

Limitations

The usable payload in STS24 is slightly less than the nominal rate due to protocol overhead.
VT2 payload units are fixed at 2.048 Mb/s so conversions scale only in multiples of this size.
The conversion assumes ideal mapping without additional overhead or framing inefficiencies.

Frequently Asked Questions

What is an STS24 signal?: STS24 is a Synchronous Optical Network signal formed by multiplexing 24 STS-1 fibers, delivering a nominal line rate of approximately 1.244 Gbit/s.
Why convert STS24 signals to Virtual Tributary 2 payloads?: Conversion helps break down large, aggregated SONET signals into smaller 2.048 Mb/s channels for detailed provisioning and multiplexing of legacy TDM circuits.
Can I convert fractional VT2 payload units from STS24 signals?: No, since VT2 payload size is fixed, conversions work best in whole multiples of 2.048 Mb/s bandwidth units.

Key Terminology

STS24 (signal): A SONET synchronous transport signal created by multiplexing 24 STS-1 channels, with a nominal line rate near 1.244 Gbit/s.
Virtual Tributary 2 (VT2): A SONET/SDH payload container sized to carry a 2.048 Mb/s PDH/E1 channel, used for granular multiplexing of legacy TDM signals.
SONET Overhead: Additional bits in the SONET frame used for management and signaling, which reduce usable payload capacity from nominal line rates.
TDM (Time-Division Multiplexing): A method of multiplexing multiple digital signal streams by dividing them into time slots within a single physical channel.

Quick Knowledge Check

What is the nominal line rate of an STS24 signal?

About 1.244 Gbit/s

Exactly 2.048 Mb/s

Around 51.84 Mbit/s

What bandwidth does a Virtual Tributary 2 payload carry?

1.544 Mb/s

2.048 Mb/s

24 Mbit/s

Why is it useful to convert from STS24 to VT2?

To convert Ethernet frames

To break down high-capacity signals into manageable E1-sized channels

To increase the line rate

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter