What does ISDN (dual channel) represent?

It denotes using both 64 kbit/s B channels of an ISDN Basic Rate Interface combined to provide roughly 128 kbit/s throughput.

What is STM-1 (signal) used for?

STM-1 is the basic unit of synchronous digital hierarchy signaling, carrying 155.52 Mbit/s and used for backbone telecom links.

Why convert ISDN (dual channel) to STM-1 (signal)?

To understand how low-rate ISDN data maps into higher-rate SDH transport networks for integration and capacity planning.

How to Convert from ISDN (dual channel) to STM-1 (signal)?

Learn to convert ISDN (dual channel) data transfer rates to STM-1 (signal) rates using our easy online converter for telecommunications network applications.

ISDN (dual channel)

STM-1 (signal)

Please check your input. It must be a valid numeric value.

ISDN (dual channel) to STM-1 (signal) Conversion Table

ISDN (dual channel)	STM-1 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

ISDN (dual channel) to STM-1 (signal) Conversion Table
ISDN (dual channel)	STM-1 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool converts data transfer rates from ISDN (dual channel) units to STM-1 (signal) units, helping users understand how smaller ISDN channel rates scale within high-capacity synchronous transport networks.

How to Use This Tool?

Enter the ISDN (dual channel) data transfer value you want to convert
Select ISDN (dual channel) as the source unit and STM-1 (signal) as the target unit
Click the convert button to see the equivalent STM-1 (signal) rate
Use the result to analyze or design telecom network capacity and data aggregation

Key Features

Converts ISDN (dual channel) data rates to STM-1 (signal) values
Based on established conversion rate between ISDN bonded channels and STM-1
Supports telecommunications and network design applications
Easy to use with a straightforward interface
Browser-based tool requiring no installation

Examples

1 ISDN (dual channel) equals approximately 0.000823 STM-1 (signal)
10 ISDN (dual channel) equal about 0.008230 STM-1 (signal)

Common Use Cases

Small-office or home internet setups using bonded ISDN channels
Remote LAN access utilizing combined ISDN B channels for enhanced throughput
Network engineers mapping legacy ISDN connections into SDH backbone links
Provisioning and capacity planning for high-rate fiber optic transport
Interfacing ISDN-based data rates with STM-1 in SDH/SONET systems

Tips & Best Practices

Confirm channel bonding effectiveness when dealing with ISDN dual channel rates
Use conversion results as a guideline in network design rather than strict throughput guarantees
Consider overhead and payload factors impacting real-world STM-1 signal capacity
Apply conversion for planning or integration tasks in synchronous digital hierarchy networks

Limitations

ISDN (dual channel) represents a service-level rate, not an exact SI unit, so throughput may vary
STM-1 signal rate is standardized at 155.52 Mbit/s, but practical throughput depends on overhead configurations
Conversion assumes ideal bonding and no data rate reductions from errors or protocol overhead

Frequently Asked Questions

What does ISDN (dual channel) represent?: It denotes using both 64 kbit/s B channels of an ISDN Basic Rate Interface combined to provide roughly 128 kbit/s throughput.
What is STM-1 (signal) used for?: STM-1 is the basic unit of synchronous digital hierarchy signaling, carrying 155.52 Mbit/s and used for backbone telecom links.
Why convert ISDN (dual channel) to STM-1 (signal)?: To understand how low-rate ISDN data maps into higher-rate SDH transport networks for integration and capacity planning.

Key Terminology

ISDN (dual channel): A telecommunication data rate combining two 64 kbit/s B channels bonded together for roughly 128 kbit/s throughput.
STM-1 (signal): A standard synchronous digital hierarchy transmission unit carrying a 155.52 Mbit/s framed signal, foundational for telecom backbone links.
Channel Bonding: The process of combining multiple data channels to increase the effective data transfer rate.
Synchronous Digital Hierarchy (SDH): A standardized multiplexing protocol that transfers multiple digital bit streams over optical fiber using lasers or LEDs.
Telecom Backbone: High-capacity fiber network links that carry aggregated traffic between different network segments.

Quick Knowledge Check

What combined data rate approximately corresponds to ISDN (dual channel)?

64 kbit/s

128 kbit/s

155.52 Mbit/s

What is the bit rate of an STM-1 signal?

128 kbit/s

155.52 Mbit/s

2430 bytes every second

Why is converting from ISDN (dual channel) to STM-1 useful?

To speed up data transmission

To map low-rate channels into SDH networks

To change channel bonding methods

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter