What Is This Tool?
This converter allows users to translate data transfer measurements between STM-1 (signal), a high-capacity synchronous transmission unit, and ISDN (dual channel), which represents combined ISDN B channels for data transfer. It is designed to aid telecom professionals and network planners in relating backbone and service-level data rates.
How to Use This Tool?
-
Enter the value in STM-1 (signal) you want to convert.
-
Select STM-1 (signal) as the source unit and ISDN (dual channel) as the target unit.
-
View the calculated equivalent in ISDN (dual channel) based on the conversion rate.
-
Use the result for planning or understanding telecom capacity comparisons.
Key Features
-
Converts data transfer units between STM-1 (signal) and ISDN (dual channel).
-
Uses standardized conversion rates reflecting telecommunication data throughput.
-
Supports planning and capacity estimation in telecom and networking.
-
Browser-based and easy to use with no setup required.
Examples
-
2 STM-1 (signal) equals 2430 ISDN (dual channel).
-
0.5 STM-1 (signal) equals 607.5 ISDN (dual channel).
Common Use Cases
-
Provisioning 155.52 Mbit/s backbone fiber links using STM-1 units.
-
Relating high-capacity SDH backbone rates to ISDN bonded channel throughput.
-
Interconnecting SDH and ISDN service configurations in telecom networks.
-
Remote LAN access or backup links combining multiple ISDN channels.
Tips & Best Practices
-
Use this converter for conceptual or capacity-planning purposes rather than exact physical equivalence.
-
Remember that ISDN (dual channel) is a service-level indicator and may have throughput variations due to overhead.
-
Confirm network requirements by considering protocol and line conditions impacting actual transfer rates.
-
Leverage the tool to compare backbone and customer-level data rates effectively.
Limitations
-
ISDN (dual channel) represents a telecommunication service configuration rather than a strict SI unit.
-
Variations in actual throughput may occur because of protocol overhead and line quality.
-
STM-1 and ISDN units differ significantly in bit rates; this conversion is mainly for planning and conceptual understanding.
Frequently Asked Questions
-
What does STM-1 (signal) represent?
-
STM-1 (signal) is the fundamental transmission unit in SDH networks, carrying a synchronous signal at a gross bit rate of 155.52 Mbit/s, and serves as a base for higher-rate signals.
-
What is ISDN (dual channel)?
-
ISDN (dual channel) combines two 64 kbit/s bearer channels from an ISDN Basic Rate Interface to provide approximately 128 kbit/s of data throughput.
-
Why convert STM-1 (signal) to ISDN (dual channel)?
-
This conversion helps relate high-capacity backbone rates to smaller bonded ISDN channel capacities for network planning and interconnection between different telecommunication systems.
Key Terminology
-
STM-1 (signal)
-
The basic transmission unit in SDH networks with a gross bit rate of 155.52 Mbit/s, providing a synchronous framed signal.
-
ISDN (dual channel)
-
A data transfer configuration using two 64 kbit/s ISDN bearer channels in parallel to offer about 128 kbit/s throughput.
-
SDH
-
Synchronous Digital Hierarchy, a standardized protocol for high-speed digital transmission over fiber optic networks.