What Is This Tool?
This tool converts data transfer measurements from SCSI (Fast), a legacy parallel storage bus standard, to STM-1 (signal), a telecommunications digital signal format used in synchronous optical networks.
How to Use This Tool?
-
Enter the value in SCSI (Fast) units.
-
Select SCSI (Fast) as the input unit and STM-1 (signal) as the output unit.
-
Click the convert button to see the result in STM-1 (signal).
Key Features
-
Converts data transfer rates between Fast SCSI and STM-1 (signal) units.
-
Supports legacy and telecommunications measurement standards.
-
Simple interface for quick and accurate unit conversion.
-
Browser-based, no installation needed.
Examples
-
1 SCSI (Fast) converts to approximately 0.514 STM-1 (signal).
-
5 SCSI (Fast) converts to 2.572 STM-1 (signal).
Common Use Cases
-
Translating legacy parallel storage transfer rates into telecommunications digital signal units.
-
Facilitating integration between storage systems and network infrastructures.
-
Supporting network capacity planning involving both legacy and modern data transfer rates.
Tips & Best Practices
-
Use this conversion to compare legacy SCSI device speeds with synchronous optical signal rates.
-
Remember this tool helps in bridging storage and telecommunications measurement concepts.
-
Verify the context of use since SCSI (Fast) and STM-1 (signal) differ in technology type.
Limitations
-
Conversion is approximate due to differences between storage bus and optical signals.
-
Actual throughput equivalence may vary in operational scenarios.
-
Legacy SCSI (Fast) speeds are low compared to current high-speed networks.
Frequently Asked Questions
-
What does SCSI (Fast) represent?
-
SCSI (Fast) is a parallel SCSI bus extension that increases transfer rates of original SCSI, commonly used with legacy storage devices.
-
What is STM-1 (signal)?
-
STM-1 (signal) is the basic transmission unit of SDH, carrying synchronous framed data at 155.52 Mbit/s, used in telecom fiber networks.
-
Why convert between SCSI (Fast) and STM-1 (signal)?
-
Conversion helps translate legacy storage transfer rates into digital signal units for telecom network planning and system integration.
Key Terminology
-
SCSI (Fast)
-
A legacy parallel SCSI bus extension increasing transfer rates, used with older storage devices like hard drives and tape drives.
-
STM-1 (signal)
-
The basic transmission unit of the Synchronous Digital Hierarchy, carrying synchronous framed data at about 155.52 Mbit/s used in telecommunications.
-
Data Transfer
-
The process of moving data between devices or systems, measured here in terms of transfer rate units like SCSI (Fast) and STM-1 (signal).