What Is This Tool?
This tool converts data transfer rates from ISDN (dual channel) to IDE (PIO mode 1), translating between a telecommunications channel bonding standard and a legacy storage device data transfer mode. It is designed for comparisons and benchmarking involving vintage and embedded systems.
How to Use This Tool?
-
Enter the value in ISDN (dual channel) data rate units
-
Select ISDN (dual channel) as the input unit and IDE (PIO mode 1) as the output unit
-
Click convert to see the equivalent value in IDE (PIO mode 1)
-
Use the result to support comparisons or benchmarking across different systems
Key Features
-
Converts between ISDN (dual channel) and IDE (PIO mode 1) data transfer descriptors
-
Standardized conversion factor based on recognized throughput values
-
Supports use cases in legacy hardware diagnostics and telecommunications
-
Browser-based and easy to use for quick comparisons
-
Helps translate between different hardware data transfer standards
Examples
-
10 ISDN (dual channel) converts to approximately 0.0308 IDE (PIO mode 1)
-
50 ISDN (dual channel) converts to approximately 0.1538 IDE (PIO mode 1)
Common Use Cases
-
Small-office or home internet access scenarios using ISDN channel bonding
-
Legacy PATA hard drive and optical drive configuration or troubleshooting
-
Remote LAN access with ISDN dual channels combined for higher throughput
-
Firmware development or debugging involving CPU-driven PIO transfer modes
-
Benchmarking data-transfer speeds on vintage or embedded systems
Tips & Best Practices
-
Use this converter for comparative or benchmark purposes rather than direct equivalence
-
Consider hardware and CPU load impacts when analyzing real transfer speeds
-
Apply the tool when dealing with vintage computing systems or legacy telecommunication links
-
Understand that the conversion is conceptual, reflecting different technology domains
Limitations
-
ISDN (dual channel) and IDE (PIO mode 1) represent different technologies, so their conversion is conceptual
-
Conversion cannot be used as a direct performance equivalence measure
-
Real-world throughput may vary due to hardware conditions, CPU overhead, and protocol factors
Frequently Asked Questions
-
What does ISDN (dual channel) mean?
-
ISDN (dual channel) uses both 64 kbit/s B channels in an ISDN Basic Rate Interface combined to provide about 128 kbit/s data throughput.
-
What is IDE (PIO mode 1)?
-
IDE (PIO mode 1) is a CPU-controlled data transfer mode for legacy PATA devices that provides moderate throughput with higher CPU use compared to DMA modes.
-
Why convert between ISDN (dual channel) and IDE (PIO mode 1)?
-
This conversion helps compare telecommunications data rates to legacy storage transfer modes for benchmarking and assessing capabilities across different hardware standards.
Key Terminology
-
ISDN (dual channel)
-
A data transfer configuration using two 64 kbit/s B channels bonded to provide about 128 kbit/s throughput.
-
IDE (PIO mode 1)
-
A CPU-driven data transfer mode for legacy Parallel ATA storage devices with moderate speed and higher CPU load.
-
Channel Bonding
-
The technique of combining multiple communication channels to increase bandwidth.
-
PIO (Programmed Input/Output)
-
A method where the CPU manages each data transfer cycle directly.