What does 1 Btu (IT)/second/square foot represent?

It represents a heat flux density unit quantifying one British thermal unit transferred per second across one square foot of surface area.

When should I use calorie (IT)/hour/square centimeter units?

These units are typically used in small-scale lab testing, older engineering literature, and calibration scenarios relying on calorie-based measurements.

Can I use this converter for transient heat transfer calculations?

No, this conversion is intended for steady-state heat flux and does not apply to transient or non-uniform heat transfer.

How to Convert from Btu (IT)/second/square foot to Calorie (IT)/hour/square centimeter?

Learn how to convert heat flux density values from Btu (IT)/second/square foot to calorie (IT)/hour/square centimeter with ease. Understand the units, their uses, and conversion steps for accurate thermal measurements.

Btu (IT)/second/square foot

Calorie (IT)/hour/square centimeter

Please check your input. It must be a valid numeric value.

Btu (IT)/second/square foot to Calorie (IT)/hour/square centimeter Conversion Table

Btu (IT)/second/square foot	Calorie (IT)/hour/square centimeter

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Btu (IT)/second/square foot to Calorie (IT)/hour/square centimeter Conversion Table
Btu (IT)/second/square foot	Calorie (IT)/hour/square centimeter

Explore More Heat Flux Density Units Converter

What Is This Tool?

This converter is designed to transform heat flux density values measured in Btu (IT)/second/square foot into calorie (IT)/hour/square centimeter. These units quantify thermal power per area and are commonly used in specialized thermal measurements and engineering contexts.

How to Use This Tool?

Enter the heat flux value in Btu (IT)/second/square foot.
Select the target unit calorie (IT)/hour/square centimeter.
Initiate the conversion to get the equivalent value.

Key Features

Converts heat flux density from Btu (IT)/second/square foot to calorie (IT)/hour/square centimeter precisely.
Supports non-SI units commonly used in fire testing, furnace experiments, and insulation evaluations.
Allows easy translation of high-intensity heat flux data into smaller scale calorie-based units.

Examples

2 Btu (IT)/second/square foot converts to 1952.97 calorie (IT)/hour/square centimeter.
0.5 Btu (IT)/second/square foot converts to 488.24 calorie (IT)/hour/square centimeter.

Common Use Cases

Translating radiative heat flux measurements in fire safety testing.
Specifying localized heat loads in high-temperature furnace and plasma heating setups.
Comparing heat flux on materials during insulation or thermal conductivity laboratory tests.
Interpreting older engineering data and calibrations using calorie-based units.

Tips & Best Practices

Always confirm the heat flux is steady-state before applying this conversion.
Ensure clarity on unit context to avoid confusion between non-SI heat flux units.
Use this converter to align measurements from large-scale tests to smaller-scale laboratory standards.

Limitations

Both units are non-SI, which might cause misunderstandings if their contexts are unclear.
Conversion assumes uniform thermal flux and does not cover transient heat transfer scenarios.

Frequently Asked Questions

What does 1 Btu (IT)/second/square foot represent?: It represents a heat flux density unit quantifying one British thermal unit transferred per second across one square foot of surface area.
When should I use calorie (IT)/hour/square centimeter units?: These units are typically used in small-scale lab testing, older engineering literature, and calibration scenarios relying on calorie-based measurements.
Can I use this converter for transient heat transfer calculations?: No, this conversion is intended for steady-state heat flux and does not apply to transient or non-uniform heat transfer.

Key Terminology

Btu (IT)/second/square foot: A non-SI heat flux density unit equal to one British thermal unit per second across one square foot, used for high-intensity heat transfer measurements.
Calorie (IT)/hour/square centimeter: A non-SI unit measuring heat flux as calories transferred per hour across one square centimeter, common in material testing and older engineering contexts.
Heat Flux Density: The rate of heat transfer per unit surface area, expressed in various units such as Btu/s/ft² or cal/h/cm².

Quick Knowledge Check

Which unit measures heat flux density as energy transferred per second across a square foot?

Calorie (IT)/hour/square centimeter

Btu (IT)/second/square foot

Watt per square meter

For what type of experiments is Btu (IT)/second/square foot commonly used?

Small-scale laboratory insulation tests

Fire testing and high-temperature furnace experiments

Calibrating older engineering equipment using calories

What is a limitation of converting between these heat flux units?

Conversion accounts for transient heat flows

Units are non-SI and may confuse without proper context

The units measure volume heat flux

Share Us

Similar Calculators

Online Temperature Units Converter Online Data Storage Units Converter Online Charge Units Converter Online Permeability Units Converter Online Linear Current Density Units Converter