What does STS3c (signal) represent?

STS-3c (Synchronous Transport Signal level 3, concatenated) is a SONET electrical transport signal formed by concatenating three STS-1 channels, with a gross data rate of 155.52 Mbit/s, used for high-bandwidth telecom transport.

Is Ethernet a unit of data transfer rate?

Ethernet is a family of standardized networking technologies defining frame formats and physical media, used to deliver data at various link rates; it is not itself a unit of measurement.

Why convert STS3c (signal) to Ethernet?

Converting STS3c (signal) to Ethernet helps relate SONET telecom capacities to Ethernet network speeds, facilitating integration between telecom circuits and Ethernet-based data networks.

How to Convert from STS3c (signal) to Ethernet?

Learn how to convert data transfer rates from STS3c (signal), a SONET electrical transport signal, to Ethernet, the widely used networking technology. This guide explains the relationship, use cases, and practical conversion steps.

STS3c (signal)

Ethernet

Please check your input. It must be a valid numeric value.

STS3c (signal) to Ethernet Conversion Table

STS3c (signal)	Ethernet

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

STS3c (signal) to Ethernet Conversion Table
STS3c (signal)	Ethernet

Explore More Data Transfer Units Converter

What Is This Tool?

This converter transforms data transfer measurements from STS3c (signal) units, representing a high-bandwidth SONET transport signal, to Ethernet link speeds commonly used in local and wide area networks. It helps relate telecom transport capacities to Ethernet networking rates.

How to Use This Tool?

Enter the value in STS3c (signal) units you want to convert
Select STS3c (signal) as the input unit and Ethernet as the output unit
Click convert to see the equivalent Ethernet value based on the conversion rate
Use the results to understand the relationship between SONET and Ethernet data rates

Key Features

Converts STS3c (signal) data rates into Ethernet equivalents
Supports telecommunications and data networking applications
Facilitates mapping of SONET payloads to Ethernet link speeds
Browser-based and easy to use for quick conversions

Examples

1 STS3c (signal) equals 15.552 Ethernet
2 STS3c (signal) equals 31.104 Ethernet

Common Use Cases

Provisioning 155.52 Mbps backbone or leased-line circuits in telecom networks using OC-3c/STS-3c
Transporting Ethernet or Packet-over-SONET as a high-bandwidth virtual circuit
Connecting metro or backhaul SONET equipment for aggregated traffic
Relating SONET backbone capacities to Ethernet networking speeds in data centers and enterprise networks

Tips & Best Practices

Confirm the appropriate Ethernet standard when interpreting conversion results due to Ethernet’s varying link rates
Use the converter as a reference to approximate Ethernet equivalency of SONET signals
Consider network overhead and protocol framing differences when planning actual bandwidth usage
Use the tool to facilitate integration between legacy telecom circuits and modern Ethernet networks

Limitations

Ethernet is a family of protocols, not a single unit of data rate, so the conversion maps payload capacity to typical Ethernet rates
Differences in framing and overhead between SONET and Ethernet mean actual throughput may vary
The conversion assumes ideal conditions without accounting for network-specific factors
Results offer approximate equivalency rather than exact matching data rates

Frequently Asked Questions

What does STS3c (signal) represent?: STS-3c (Synchronous Transport Signal level 3, concatenated) is a SONET electrical transport signal formed by concatenating three STS-1 channels, with a gross data rate of 155.52 Mbit/s, used for high-bandwidth telecom transport.
Is Ethernet a unit of data transfer rate?: Ethernet is a family of standardized networking technologies defining frame formats and physical media, used to deliver data at various link rates; it is not itself a unit of measurement.
Why convert STS3c (signal) to Ethernet?: Converting STS3c (signal) to Ethernet helps relate SONET telecom capacities to Ethernet network speeds, facilitating integration between telecom circuits and Ethernet-based data networks.

Key Terminology

STS3c (signal): An electrical SONET signal combining three STS-1 channels into one contiguous payload with a gross data rate of 155.52 Mbit/s.
Ethernet: A family of wired networking technologies specifying frame formats and physical media for local area networks with various link rates.
SONET: A standardized optical telecommunications transport protocol used for high-speed data transmission.

Quick Knowledge Check

What does the 'c' in STS-3c signify?

A split payload container across channels

A concatenated payload container for a single contiguous stream

A compressed data payload

Which technology defines frame formats and link-layer behavior for LANs?

SONET

Ethernet

STS3c (signal)

What is the approximate Ethernet equivalent of 1 STS3c (signal)?

1 Ethernet

15.552 Ethernet

155.52 Ethernet

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter