What Is This Tool?
This converter tool transforms data transfer rates from STS12 (signal), a high-speed SONET transport signal, into Virtual Tributary 2 (VT2) signals, which carry lower-rate PDH payloads within a SONET framework.
How to Use This Tool?
-
Enter the value in STS12 (signal) you want to convert.
-
Select STS12 (signal) as the input unit and Virtual Tributary 2 (signal) as the output unit.
-
Click the convert button to get the equivalent number of Virtual Tributary 2 signals.
-
Review the results displayed for your telecom network planning or configuration needs.
Key Features
-
Converts STS12 (signal) data rates into Virtual Tributary 2 (signal) format.
-
User-friendly interface suitable for telecom network planners and engineers.
-
Supports conversion based on the exact ratio of 1 STS12 = 270 Virtual Tributary 2 signals.
-
Browser-based tool requiring no software installation.
Examples
-
2 STS12 (signal) equals 540 Virtual Tributary 2 (signal).
-
0.5 STS12 (signal) equals 135 Virtual Tributary 2 (signal).
Common Use Cases
-
Aggregating regional traffic over carrier or ISP metro fiber links using OC-12/STS-12.
-
Transporting framed payloads such as ATM, POS, and Ethernet circuits on SONET infrastructure.
-
Configuring SONET multiplexers to manage lower-rate PDH channels within higher-rate SONET signals.
-
Capacity planning in telecom networks combining legacy E1 services with SONET backbones.
Tips & Best Practices
-
Verify input values correspond to actual STS12 line rates in your network.
-
Use results to efficiently multiplex 2.048 Mbps E1 channels within STS12 frameworks.
-
Plan conversions considering the framework of SONET systems for accurate provisioning.
Limitations
-
Conversion does not account for SONET framing and management overhead inefficiencies.
-
Actual throughput may differ slightly due to overhead in SONET encapsulation.
-
Results apply strictly within SONET systems and are not valid for other transport technologies.
Frequently Asked Questions
-
What is the conversion rate from STS12 (signal) to Virtual Tributary 2 (signal)?
-
The conversion rate is 1 STS12 (signal) equals 270 Virtual Tributary 2 (signal).
-
Can this converter be used for non-SONET transport technologies?
-
No, the conversion is specific to SONET systems and may not apply to other transport methods.
-
Why might actual throughput vary when converting between these units?
-
Throughput can vary due to SONET framing, overhead, and payload encapsulation inefficiencies not covered by the simple conversion ratio.
Key Terminology
-
STS12 (signal)
-
A SONET transport signal running at 622.08 Mbit/s, used in high-speed regional or metro fiber links to carry multiplexed digital payloads.
-
Virtual Tributary 2 (Signal)
-
A SONET/SDH sub-rate signal that carries a 2.048 Mbps payload (E1 channel) inside a higher-rate SONET/SDH frame, enabling multiplexing of lower-rate PDH circuits.
-
SONET
-
Synchronous Optical Network, a standardized digital communication protocol used to transmit multiple digital bit streams over optical fiber.
-
PDH
-
Plesiochronous Digital Hierarchy, a telecommunications network transmission technology used to transport data with slight timing variations.