What Is This Tool?
This converter allows you to translate data transfer rates from STM-4 (signal), a high-speed optical network transmission standard, to IDE (UDMA mode 3), a legacy PATA/IDE storage interface mode. It is designed for users needing to compare telecommunications network speeds with older computer hardware rates.
How to Use This Tool?
-
Enter the value you want to convert in STM-4 (signal) units
-
Select STM-4 (signal) as the source unit
-
Choose IDE (UDMA mode 3) as the target unit
-
Click the convert button to see the equivalent value
-
Use the result for performance analysis or hardware configuration insights
Key Features
-
Converts data transfer units between STM-4 (signal) and IDE (UDMA mode 3)
-
Easy-to-use, browser-based interface for quick conversions
-
Supports comparison of high-speed optical transmission with legacy PATA/IDE speeds
-
Provides examples to demonstrate typical conversions
-
Useful for telecom network design and storage device benchmarking
Examples
-
2 STM-4 (signal) equals 3.1104 IDE (UDMA mode 3)
-
0.5 STM-4 (signal) equals 0.7776 IDE (UDMA mode 3)
Common Use Cases
-
Comparing optical network data rates with legacy PATA/IDE drive speeds
-
Configuring or benchmarking legacy hardware transfer modes
-
Assessing telecommunications backbone capacity against storage interface throughput
-
Supporting system refurbishment and compatibility troubleshooting
-
Documenting data transfer specifications in mixed technology environments
Tips & Best Practices
-
Use the converter to align telecom data rates with legacy storage system capabilities
-
Remember that STM-4 includes overhead, so actual payload may be lower
-
Consider the theoretical nature of IDE (UDMA mode 3) maximum speeds when benchmarking
-
Apply conversions primarily for comparative or educational purposes
-
Verify hardware settings separately when configuring legacy storage devices
Limitations
-
STM-4 (signal) and IDE (UDMA mode 3) belong to different technical domains
-
The conversion is mainly for comparison, not for practical interchangeability
-
IDE (UDMA mode 3) speed values are theoretical maxima and may vary in practice
-
STM-4 nominal rate includes overhead, so throughput might differ in real environments
Frequently Asked Questions
-
What does STM-4 (signal) represent?
-
STM-4 (signal) is a standardized optical transmission frame in the Synchronous Digital Hierarchy with a nominal line rate of 622.08 Mbit/s used for transporting digital traffic including payload and overhead.
-
What is IDE (UDMA mode 3)?
-
IDE (UDMA mode 3) is an Ultra DMA transfer mode for Parallel ATA interfaces providing a theoretical maximum raw transfer rate of about 44.4 MB/s commonly used for legacy PATA/IDE devices.
-
Why convert between STM-4 (signal) and IDE (UDMA mode 3)?
-
Conversions help compare high-speed telecommunications data rates with legacy storage interface speeds for performance benchmarking and system compatibility assessments.
Key Terminology
-
STM-4 (signal)
-
A Synchronous Transport Module level‑4 in the SDH standard with a line rate of 622.08 Mbit/s used primarily in telecom optical transmission.
-
IDE (UDMA mode 3)
-
An Ultra DMA transfer mode for legacy Parallel ATA interfaces with a theoretical maximum transfer rate of approximately 44.4 MB/s.
-
Synchronous Digital Hierarchy (SDH)
-
A standardized protocol for transmitting digital signals over optical networks.