What does calorie (IT)/hour/square centimeter measure?

It measures the rate of heat transfer per unit area using International Table calories delivered per hour across one square centimetre.

Why convert calorie (IT)/hour/square centimeter to CHU/hour/square foot?

Conversion allows translation of measurements from small-scale or older calorie-based units to those used in building and HVAC applications focused on square foot areas.

Are these units part of the SI system?

No, calorie (IT)/hour/square centimeter is a non-SI unit, and CHU/hour/square foot also relies on defined energy equivalences outside the SI framework.

How to Convert from Calorie (IT)/hour/square centimeter to CHU/hour/square foot?

Learn how to convert heat flux density units from calorie (IT)/hour/square centimeter to CHU/hour/square foot using our easy-to-follow guide and understand their applications.

Calorie (IT)/hour/square centimeter

CHU/hour/square foot

Please check your input. It must be a valid numeric value.

Calorie (IT)/hour/square centimeter to CHU/hour/square foot Conversion Table

Calorie (IT)/hour/square centimeter	CHU/hour/square foot

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Calorie (IT)/hour/square centimeter to CHU/hour/square foot Conversion Table
Calorie (IT)/hour/square centimeter	CHU/hour/square foot

Explore More Heat Flux Density Units Converter

What Is This Tool?

This unit converter transforms heat flux density measurements from calorie (IT)/hour/square centimeter to CHU/hour/square foot. It helps users translate between these two units which describe the rate of heat transfer per unit area, widely used in laboratory, engineering, and HVAC contexts.

How to Use This Tool?

Enter the heat flux density value in calorie (IT)/hour/square centimeter you wish to convert.
Select the target unit as CHU/hour/square foot.
Initiate the conversion to view the equivalent heat flux density in CHU/hour/square foot.
Review example calculations for guidance if needed.

Key Features

Converts heat flux density values between calorie (IT)/hour/square centimeter and CHU/hour/square foot.
Based on defined conversion rate to ensure accurate unit translation.
Supports applications in thermal testing, building energy analysis, and HVAC design.
Browser-based and easy to use without installation.
Provides clear example calculations to demonstrate conversion.

Examples

5 calorie (IT)/hour/square centimeter converts to approximately 10.24 CHU/hour/square foot.
0.1 calorie (IT)/hour/square centimeter converts to about 0.205 CHU/hour/square foot.

Common Use Cases

Reporting small-scale surface heat loss or gain in laboratory thermal conductivity tests.
Specifying heat flux in older engineering literature where calorie-based units apply.
Conducting HVAC load calculations and evaluating building insulation on a per-square-foot basis.
Sizing radiant heating or cooling equipment according to heat flux requirements.

Tips & Best Practices

Always confirm the unit definitions to ensure correct conversion.
Use the tool to switch between older calorie-based units and building industry units to maintain consistency.
Consider the differences in area units when interpreting results (square centimeters vs. square feet).
Refer to example calculations to validate your inputs and outputs.

Limitations

Calorie (IT)/hour/square centimeter is a non-SI unit less commonly used in modern engineering.
Differences in area units (cm² vs. ft²) require careful handling of conversion factors.
Conversion accuracy depends on the exact energy equivalence of the CHU unit, which may vary regionally.

Frequently Asked Questions

What does calorie (IT)/hour/square centimeter measure?: It measures the rate of heat transfer per unit area using International Table calories delivered per hour across one square centimetre.
Why convert calorie (IT)/hour/square centimeter to CHU/hour/square foot?: Conversion allows translation of measurements from small-scale or older calorie-based units to those used in building and HVAC applications focused on square foot areas.
Are these units part of the SI system?: No, calorie (IT)/hour/square centimeter is a non-SI unit, and CHU/hour/square foot also relies on defined energy equivalences outside the SI framework.

Key Terminology

Calorie (IT)/hour/square centimeter: A heat flux density unit expressing heat transfer rate in International Table calories per hour over one square centimetre of surface.
CHU/hour/square foot: A heat flux density unit showing heat transfer per hour in CHU thermal energy units across one square foot of surface.
Heat flux density: The measurement of heat energy transfer per unit time and per unit surface area.

Quick Knowledge Check

What type of measurement do these units describe?

Length measurement

Heat flux density

Time duration

Which unit area units are used by calorie (IT)/hour and CHU/hour respectively?

Square foot for calorie (IT)/hour, square centimeter for CHU/hour

Square centimeter for calorie (IT)/hour, square foot for CHU/hour

Both use square meter

Why must conversion factors be applied carefully between these units?

Because they represent different physical measurements

Because of varying unit area scales and definitions

Because both are SI units with identical scales

Share Us

Similar Calculators

Online Temperature Units Converter Online Data Storage Units Converter Online Charge Units Converter Online Permeability Units Converter Online Linear Current Density Units Converter