What does horsepower (metric)/square foot measure?

It measures heat flux density as power (metric horsepower) distributed over an area of one square foot, indicating the rate of heat transfer per unit area.

Why use calorie (IT)/hour/square centimeter units?

These units are used to report small-scale surface heat transfer rates, often in laboratory tests or older engineering documents where calorie-based measurements are standard.

Is this converter suitable for modern engineering applications?

It is useful for legacy or mixed-unit scenarios, but modern thermal analysis usually prefers SI units like watts per square meter for consistency.

Convert Horsepower (metric)/square foot to Calorie (IT)/hour/square centimeter

Easily convert heat flux density values from horsepower (metric) per square foot to calorie (IT) per hour per square centimeter with this practical online tool.

Horsepower (metric)/square foot

Calorie (IT)/hour/square centimeter

Please check your input. It must be a valid numeric value.

Horsepower (metric)/square foot to Calorie (IT)/hour/square centimeter Conversion Table

Horsepower (metric)/square foot	Calorie (IT)/hour/square centimeter

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Horsepower (metric)/square foot to Calorie (IT)/hour/square centimeter Conversion Table
Horsepower (metric)/square foot	Calorie (IT)/hour/square centimeter

Explore More Heat Flux Density Units Converter

What Is This Tool?

This converter allows users to translate heat flux density measurements given in horsepower (metric) per square foot into calorie (IT) per hour per square centimeter. It serves to bridge units combining metric horsepower with imperial area units into calorie-based heat flux units commonly used in older engineering and laboratory contexts.

How to Use This Tool?

Enter the numeric value in horsepower (metric)/square foot to convert
Choose calorie (IT)/hour/square centimeter as the target unit
Click the convert button to see the result instantly
Refer to provided examples for guidance on typical conversions

Key Features

Converts heat flux density units between horsepower (metric)/square foot and calorie (IT)/hour/square centimeter
Provides clear conversion formulas and examples for ease of understanding
Supports industrial and laboratory use cases involving legacy and mixed unit systems
Browser-based with a user-friendly interface for quick calculations

Examples

Converting 2 horsepower (metric)/square foot results in approximately 1361.45 calorie (IT)/hour/square centimeter
A value of 0.5 horsepower (metric)/square foot equals about 340.36 calorie (IT)/hour/square centimeter

Common Use Cases

Specifying or converting surface heat loads for industrial furnaces, boilers, or radiators combining metric horsepower and imperial area units
Converting heat flux values for engine cooling surface thermal analysis or heat exchanger evaluations when encountering legacy units
Reporting small-scale heat loss or gain in laboratory thermal conductivity and insulation material testing
Calibrating heating equipment and referencing older engineering standards using calorie-based units

Tips & Best Practices

Verify unit compatibility before conversion when working with strictly SI measurement systems
Use provided examples and formulas to validate conversion results
Consider rounding limitations when requiring high precision due to large conversion factors
Adopt SI units for consistent and standardized thermal engineering reporting when possible

Limitations

Calorie (IT)/hour/square centimeter is a non-SI unit, so conversions should be used carefully in SI-focused contexts
The large conversion factor may cause rounding differences when handling values needing many decimal places
Modern thermal engineering prefers W/m² or SI units, potentially restricting the use of this conversion in current practice

Frequently Asked Questions

What does horsepower (metric)/square foot measure?: It measures heat flux density as power (metric horsepower) distributed over an area of one square foot, indicating the rate of heat transfer per unit area.
Why use calorie (IT)/hour/square centimeter units?: These units are used to report small-scale surface heat transfer rates, often in laboratory tests or older engineering documents where calorie-based measurements are standard.
Is this converter suitable for modern engineering applications?: It is useful for legacy or mixed-unit scenarios, but modern thermal analysis usually prefers SI units like watts per square meter for consistency.

Key Terminology

Horsepower (metric)/square foot: A heat flux density unit representing one metric horsepower of power distributed over one square foot of surface area, used to measure rate of heat transfer.
Calorie (IT)/hour/square centimeter: A non-SI heat flux density unit measuring heat transfer rate in International Table calories per hour per square centimeter.
Heat flux density: The rate of heat transfer per unit area, often used in thermal engineering to describe surface heat loads.

Quick Knowledge Check

What category does horsepower (metric)/square foot belong to?

Heat flux density

Electrical power

Volume flow rate

Which scenario best fits using calorie (IT)/hour/square centimeter?

Laboratory insulation testing

Measuring electrical voltage

Calculating volume in liters

What is a limitation of calorie (IT)/hour/square centimeter unit?

Non-SI unit

Cannot measure temperature

Not recognized internationally

Share Us

Similar Calculators

Online Temperature Units Converter Online Data Storage Units Converter Online Charge Units Converter Online Permeability Units Converter Online Linear Current Density Units Converter