What Is This Tool?
This converter allows you to change flow measurements from kilogram per day for gasoline at 15.5°C—a mass flow rate standardized for temperature—to cubic inch per hour, a volumetric flow unit used for very low flow rates in imperial units.
How to Use This Tool?
-
Enter the value in kilogram/day (Gasoline at 15.5°C) you want to convert.
-
Select kilogram/day (Gasoline at 15.5°C) as the input unit and cubic inch/hour [in³/h] as the output unit.
-
Click the convert button to get the equivalent cubic inch/hour value.
-
Use the result for flow measurement or calibration needs.
Key Features
-
Converts mass flow rates of gasoline at a standard temperature to precise low volumetric flow rates.
-
Uses a conversion rate based on gasoline density corrected to 15.5°C for consistent results.
-
Simple online interface for quick and accurate unit transformations.
-
Supports applications in petroleum custody transfer, laboratory dosing, and leak detection.
Examples
-
5 kilogram/day (Gasoline at 15.5°C) converts to approximately 17.1957 cubic inch/hour [in³/h].
-
0.1 kilogram/day (Gasoline at 15.5°C) converts to approximately 0.3439 cubic inch/hour [in³/h].
Common Use Cases
-
Custody transfer and invoicing of gasoline delivered via pipeline or tanker, standardized at 15.5°C.
-
Inventory reconciliation and throughput reporting at fuel depots and refineries.
-
Precise dosing in laboratory and microfluidic research applications requiring low volume flow control.
-
Leak rate measurement and calibration of low-flow pumps and meters in engineering and environmental fields.
Tips & Best Practices
-
Ensure gasoline density is referenced at 15.5°C to maintain consistency in conversions.
-
Use cubic inch/hour units primarily for very low-volume flow rates for better precision.
-
Verify measurement context to distinguish between mass flow and volumetric flow requirements.
-
Use reliable data sources for density when performing mass to volume flow conversions.
Limitations
-
Conversion accuracy depends on gasoline density standardized at 15.5°C; variations in temperature or composition may affect results.
-
Cubic inch/hour is intended for low flow rates; conversion of large flow rates might be impractical.
-
Precise conversion requires an accurate density reference to relate mass flow to volume flow effectively.
Frequently Asked Questions
-
Why is gasoline at 15.5°C used in this conversion?
-
Gasoline density is referenced at 15.5°C to provide a standard temperature for consistent mass–volume conversions, important in petroleum measurement and custody transfer.
-
When should I use cubic inch/hour units?
-
Cubic inch/hour units are suited to quantify very low volumetric flow rates, such as leak detection, low-flow dosing, and calibration of microfluidic equipment.
-
Can I convert any mass flow to volumetric flow using this tool?
-
This tool specifically converts kilogram/day (Gasoline at 15.5°C) to cubic inch/hour based on standardized gasoline density; other substances or temperatures require appropriate references.
Key Terminology
-
Kilogram/day (Gasoline at 15.5°C)
-
A mass flow rate unit specifying gasoline flow per day with density corrected to 15.5°C for consistent mass–volume measurement.
-
Cubic inch/hour [in³/h]
-
A volumetric flow rate unit denoting one cubic inch of volume passing a point every hour, used for very low flow measurements in imperial units.
-
Custody Transfer
-
The process of transferring product ownership, requiring precise and standardized volume or mass flow measurements.