What Is This Tool?
This tool converts volumetric flow rates measured in liters per minute into mass flow rates expressed in kilograms per day for gasoline standardized at 15.5°C, a reference temperature used for accurate petroleum measurement.
How to Use This Tool?
-
Enter the flow value in liters per minute (L/min)
-
Choose the target unit: kilogram per day (Gasoline at 15.5°C)
-
Click convert to get the corresponding mass flow rate
Key Features
-
Converts flow from liter/minute units to kilogram/day adjusted for gasoline at 15.5°C
-
Accounts for density and temperature standards important in petroleum industry
-
Suitable for inventory, custody transfer, and fuel consumption calculations
Examples
-
Convert 2 L/min to kilogram/day: 2 × 1064.6338414034 = 2129.27 kg/day
-
Convert 0.5 L/min to kilogram/day: 0.5 × 1064.6338414034 = 532.32 kg/day
Common Use Cases
-
Custody transfer and invoicing for gasoline deliveries by pipeline, tanker, or terminal on a mass basis
-
Fuel inventory reconciliation and throughput reporting at depots and refineries
-
Calculating fuel consumption, emissions, or process mass balances where temperature correction is required
Tips & Best Practices
-
Always verify the temperature reference when working with fuel measurements
-
Use this conversion specifically for gasoline at 15.5°C to ensure accuracy
-
Apply this tool for consistent reporting in petroleum operations involving mass flow rates
Limitations
-
Assumes gasoline density at the standard temperature of 15.5°C; deviations may affect results
-
Not suitable for fluids other than gasoline without adjusting for their density and reference temperature
Frequently Asked Questions
-
Why is the reference temperature of 15.5°C important in this conversion?
-
The reference temperature standardizes gasoline density for consistent and accurate mass–volume conversions used in petroleum measurement.
-
Can I use this conversion for fluids other than gasoline?
-
No, this specific conversion is designed for gasoline at 15.5°C and should not be applied to other fluids without proper adjustments.
-
What industries benefit from this conversion tool?
-
Industries such as petroleum refining, fuel distribution, pipeline transport, and fuel inventory management use it to standardize gasoline flow measurements.
Key Terminology
-
Liter/minute (L/min)
-
A metric unit measuring volumetric flow, indicating volume of fluid or gas passing a point each minute.
-
Kilogram/day (Gasoline at 15.5°C)
-
A mass flow rate unit representing the mass of gasoline passing a point daily, standardized to 15.5°C for accurate measurement.
-
Reference Temperature
-
A standard temperature used to correct volumetric measurements for consistency in mass–volume conversions.