Why is the temperature of 15.5°C important in this conversion?

The temperature 15.5°C is used as a reference to standardize gasoline density for consistent mass-volume conversions essential in custody transfer and inventory.

Can I use this converter for fluids other than gasoline?

No, this conversion applies specifically to gasoline at 15.5°C and is not applicable to other fluids or different reference temperatures.

What is a cubic foot per second?

A cubic foot per second (ft³/s) is a unit of volumetric flow rate representing one cubic foot of fluid passing a point every second, often used in engineering and hydrology.

Convert Cubic foot/second to Kilogram/day (Gasoline at 15.5°C) Flow Rate

Learn how to convert flow rates from cubic foot per second (ft³/s) to mass flow rates measured in kilogram per day for gasoline at 15.5°C, essential for petroleum industry and fuel management.

Cubic foot/second [ft^3/s]

Kilogram/day (Gasoline at 15.5%b0C)

Please check your input. It must be a valid numeric value.

Cubic foot/second [ft^3/s] to Kilogram/day (Gasoline at 15.5%b0C) Conversion Table

Cubic foot/second [ft^3/s]	Kilogram/day (Gasoline at 15.5%b0C)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Cubic foot/second [ft^3/s] to Kilogram/day (Gasoline at 15.5%b0C) Conversion Table
Cubic foot/second [ft^3/s]	Kilogram/day (Gasoline at 15.5%b0C)

Explore More Flow Units Converter

What Is This Tool?

This converter translates volumetric flow rates in cubic foot per second to mass flow rates in kilogram per day for gasoline at a standard temperature of 15.5°C. It helps adjust for temperature-dependent density to ensure accurate flow measurements in fuel handling and process monitoring.

How to Use This Tool?

Enter the flow rate value in cubic foot per second (ft³/s)
Select the unit to convert to kilogram per day (Gasoline at 15.5°C)
Initiate the conversion to get the corresponding mass flow rate
Use the result for fuel custody transfer, inventory, or process calculations

Key Features

Converts volumetric flow from cubic foot per second to mass flow in kilogram per day standardized for gasoline at 15.5°C
Supports flow measurement adjustments essential for custody transfer and inventory in petroleum operations
Uses a defined conversion rate specific to gasoline density at 15.5°C
Suitable for engineering and fuel management applications involving standardized gasoline flow rates

Examples

2 cubic foot/second is equal to 3,617,648.779818 kilogram/day (Gasoline at 15.5°C)
0.5 cubic foot/second converts to 904,412.194955 kilogram/day (Gasoline at 15.5°C)

Common Use Cases

Custody transfer and invoicing for gasoline deliveries via pipelines or tankers
Inventory reconciliation and throughput tracking at fuel depots and refineries
Calculations of fuel consumption, emissions, and mass balances in refinery and distribution systems

Tips & Best Practices

Ensure accuracy of flow rate measurements in cubic foot per second before conversion
Maintain consistent temperature control at 15.5°C for reliable mass flow calculations
Use this conversion only for gasoline at 15.5°C to avoid errors from different densities or temperatures

Limitations

Conversion is valid only for gasoline density standardized at 15.5°C; other temperatures or fluids are not supported
Accuracy depends on proper measurement of flow and temperature consistency
Variations in gasoline composition may impact the precision of converted values

Frequently Asked Questions

Why is the temperature of 15.5°C important in this conversion?: The temperature 15.5°C is used as a reference to standardize gasoline density for consistent mass-volume conversions essential in custody transfer and inventory.
Can I use this converter for fluids other than gasoline?: No, this conversion applies specifically to gasoline at 15.5°C and is not applicable to other fluids or different reference temperatures.
What is a cubic foot per second?: A cubic foot per second (ft³/s) is a unit of volumetric flow rate representing one cubic foot of fluid passing a point every second, often used in engineering and hydrology.

Key Terminology

Cubic foot per second [ft³/s]: An imperial unit of volumetric flow equal to one cubic foot of fluid passing a point each second, commonly used for reporting discharge in engineering and hydrology.
Kilogram per day (Gasoline at 15.5°C): A mass flow rate unit specifying the kilograms of gasoline flowing per day with density referenced to 15.5°C to standardize measurement.
Custody transfer: The process of transferring commercial ownership of gasoline quantities, requiring accurate flow measurement and standardization.

Quick Knowledge Check

What does the unit cubic foot per second measure?

Mass flow rate of gasoline

Volumetric flow rate of fluid

Temperature of gasoline

For which fluid is this conversion specifically designed?

Water at 15.5°C

Gasoline at 15.5°C

Oil at different temperatures

Why is gasoline density referenced to 15.5°C in this context?

To correct volumetric measurements for standardization

To measure gasoline consumption

To estimate gasoline emissions

Share Us

Similar Calculators

Online Volume Units Converter Online Illumination Units Converter Online Magnetic Field Strength Units Converter Online Moment of Force Units Converter Online Data Transfer Units Converter