What does pound/foot/second measure?

It is an imperial unit of dynamic viscosity that quantifies a fluid's resistance to shear flow, defined as one pound-force second per square foot.

When should I use megapoise units?

Megapoise units are used for describing very high viscosities or in legacy CGS-based literature, especially for materials like heavy bitumen or pitch.

Why convert pound/foot/second to megapoise?

Converting helps translate viscosity values between US customary units and legacy CGS units, facilitating comparisons in research and industrial applications.

How to Convert from Pound/foot/second to Megapoise [MP]

Learn how to convert dynamic viscosity values from pound/foot/second to megapoise (MP) using a precise conversion factor. This guide helps engineers and researchers translate viscosity measurements between imperial and legacy CGS units.

Pound/foot/second

Megapoise [MP]

Please check your input. It must be a valid numeric value.

Pound/foot/second to Megapoise [MP] Conversion Table

Pound/foot/second	Megapoise [MP]

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Pound/foot/second to Megapoise [MP] Conversion Table
Pound/foot/second	Megapoise [MP]

Explore More Viscosity Dynamic Units Converter

What Is This Tool?

This converter transforms dynamic viscosity measurements from pound/foot/second, an imperial unit, into megapoise [MP], a CGS-derived unit primarily applied for very large viscosities or legacy data. It supports fluid property analysis across different measurement standards.

How to Use This Tool?

Enter the dynamic viscosity value expressed in pound/foot/second
Select pound/foot/second as the input unit and megapoise [MP] as the output unit
Click convert to obtain the viscosity expressed in megapoise
Use the resulting value for engineering calculations or legacy data analysis

Key Features

Converts viscosity from pound/foot/second to megapoise [MP]
Based on an exact conversion rate derived from standardized unit definitions
Supports engineering, industrial, and laboratory use cases
Browser-based and simple to use without additional software
Facilitates interpretation of legacy CGS and imperial viscosity data

Examples

Convert 10 pound/foot/second: 10 × 0.0000148816 = 0.000148816 MP
Convert 100 pound/foot/second: 100 × 0.0000148816 = 0.00148816 MP

Common Use Cases

Engineering calculations involving fluid flow in imperial units such as pipeline or duct design
Specifying viscosities of lubricants, hydraulic fluids, and process fluids in US-based datasheets
Converting US customary measurements to CGS units for rheology research in polymer or adhesive formulation
Analyzing legacy laboratory viscosity data expressed in CGS units
Describing extremely viscous materials like pitch or heavy bitumen in industrial reports

Tips & Best Practices

Double-check viscosity units before conversion to ensure accuracy
Use the converter to bridge fluid property data across different measuring systems
Apply conversions carefully for very high viscosities where megapoise units are more relevant
Interpret results cautiously considering scale differences between units
Use this tool for legacy or specialized viscosity values rather than everyday fluid measures

Limitations

Pound/foot/second is uncommon outside US engineering contexts, limiting international comparability
Megapoise mainly applies to very large viscosities and legacy data, less suitable for typical fluid viscosities
Conversion may not be meaningful for moderate or low viscosity fluids
Care is needed due to significant differences in unit scales and usage contexts

Frequently Asked Questions

What does pound/foot/second measure?: It is an imperial unit of dynamic viscosity that quantifies a fluid's resistance to shear flow, defined as one pound-force second per square foot.
When should I use megapoise units?: Megapoise units are used for describing very high viscosities or in legacy CGS-based literature, especially for materials like heavy bitumen or pitch.
Why convert pound/foot/second to megapoise?: Converting helps translate viscosity values between US customary units and legacy CGS units, facilitating comparisons in research and industrial applications.

Key Terminology

Pound/foot/second: An imperial unit of dynamic viscosity equal to one pound-force second per square foot, used to measure a fluid's internal resistance to shear flow.
Megapoise [MP]: A CGS-derived unit of dynamic viscosity equal to 10^6 poise, mainly applied for very high viscosities or legacy data.
Dynamic Viscosity: A fluid property quantifying resistance to shear or flow, measured as force times time per area.

Quick Knowledge Check

What type of measurement is pound/foot/second used for?

Length

Dynamic viscosity

Temperature

Which unit is mainly used for very large viscosities?

Pascal-second

Megapoise [MP]

Pound/foot/second

What is a common reason to convert pound/foot/second to megapoise?

To analyze temperature

To compare legacy viscosity data

To measure pressure

Share Us

Similar Calculators

Online Volume Charge Density Units Converter Online Velocity Angular Units Converter Online Heat Density Units Converter Online Moment of Inertia Units Converter Online Concentration Molar Units Converter