What is a dekapoise (daP)?

Dekapoise (daP) is a CGS-based unit of dynamic viscosity equal to 10 poise or 1 pascal-second, used to measure fluid resistance to shear flow.

Why convert from dekapoise to pound/foot/second?

This conversion is necessary for engineering and industrial applications in the US where imperial units are standard, ensuring compatibility with equipment datasheets and lab instruments.

How do I convert dekapoise to pound/foot/second?

Multiply the value in dekapoise by 0.6719689751 to get the equivalent viscosity in pound/foot/second.

How to Convert from Dekapoise [daP] to Pound/foot/second?

Easily convert dynamic viscosity values from dekapoise (daP), a CGS-based unit, to pound/foot/second, an imperial unit, used widely in engineering and industrial contexts.

Dekapoise [daP]

Pound/foot/second

Please check your input. It must be a valid numeric value.

Dekapoise [daP] to Pound/foot/second Conversion Table

Dekapoise [daP]	Pound/foot/second

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Dekapoise [daP] to Pound/foot/second Conversion Table
Dekapoise [daP]	Pound/foot/second

Explore More Viscosity Dynamic Units Converter

What Is This Tool?

This converter allows you to translate viscosity measurements from dekapoise (daP), a CGS-derived unit, into pound/foot/second, an imperial unit commonly used in US-based engineering and fluid mechanics applications.

How to Use This Tool?

Enter the dynamic viscosity value in dekapoise (daP)
Select the target unit as pound/foot/second
Click convert to see the equivalent viscosity in pound/foot/second
Use the provided formula and examples to verify results

Key Features

Converts dynamic viscosity from dekapoise (daP) to pound/foot/second accurately
Supports usage in chemical, petroleum, and hydraulic fluid engineering
Browser-based and easy to use for lab and industrial applications
Provides clear unit definitions and practical use cases
Includes step-by-step conversion examples for convenience

Examples

5 daP converts to approximately 3.36 pound/foot/second
10 daP converts to approximately 6.72 pound/foot/second

Common Use Cases

Reporting viscosities of heavy oils, glycerin, and polymer melts where viscosities are near 1 Pa·s
Specifying and comparing fluid behavior in rheology laboratories and calibration of viscometers
Characterizing lubricants and fluids in chemical and petroleum engineering projects
Engineering calculations for fluid flow and shear stress using imperial units
Specifying hydraulic fluid viscosities in US-based equipment datasheets
Industrial quality control with instruments calibrated in imperial units

Tips & Best Practices

Double-check unit selections before conversion to ensure accuracy
Use the conversion formula provided for manual calculations when needed
Be mindful of the unit system differences when sharing viscosity data internationally
Consider potential effects of temperature and pressure on viscosity during conversions
Use pound/foot/second primarily in US customary or imperial engineering settings

Limitations

Differences between unit systems may require careful handling to avoid rounding errors
Conversion may not account for temperature or pressure impacts on viscosity
Pound/foot/second is less common internationally and may necessitate further conversion to SI units
Complex fluid properties might require more detailed analysis beyond simple unit conversion

Frequently Asked Questions

What is a dekapoise (daP)?: Dekapoise (daP) is a CGS-based unit of dynamic viscosity equal to 10 poise or 1 pascal-second, used to measure fluid resistance to shear flow.
Why convert from dekapoise to pound/foot/second?: This conversion is necessary for engineering and industrial applications in the US where imperial units are standard, ensuring compatibility with equipment datasheets and lab instruments.
How do I convert dekapoise to pound/foot/second?: Multiply the value in dekapoise by 0.6719689751 to get the equivalent viscosity in pound/foot/second.

Key Terminology

Dekapoise (daP): A CGS-derived unit of dynamic viscosity equal to 10 poise or 1 pascal-second, quantifying fluid resistance to shear flow.
Pound/foot/second: An imperial unit of dynamic viscosity equal to one pound-force second per square foot, used in US engineering contexts.
Dynamic Viscosity: A measure of a fluid's internal resistance to flow when subjected to shear stress.

Quick Knowledge Check

What is the dekapoise unit primarily used to measure?

Pressure

Dynamic viscosity

Temperature

The pound/foot/second unit belongs to which measurement system?

Metric

Imperial/US customary

CGS

What is the conversion factor from dekapoise to pound/foot/second?

0.672

1.5

Share Us

Similar Calculators

Online Volume Charge Density Units Converter Online Velocity Angular Units Converter Online Heat Density Units Converter Online Moment of Inertia Units Converter Online Concentration Molar Units Converter