What is the relationship between rad and millirad?

One rad equals one thousand millirads; specifically, 1 rad [rd] = 1000 millirad [mrd].

Why convert rad measurements to millirad?

Converting to millirad allows expressing absorbed radiation doses in smaller increments, which is useful for detailed dosimetry and low-dose measurements.

Where are rad and millirad units commonly used?

They are used in medical radiotherapy, environmental monitoring, occupational safety, materials testing, and instrument calibration where legacy units persist.

How to Convert from Rad [rd] to Millirad [mrd]?

Learn how to convert radiation absorbed dose values from rad (rd) to millirad (mrd), understand their definitions, use cases, and practical conversions for precise dosimetry.

Rad [rd]

Millirad [mrd]

Please check your input. It must be a valid numeric value.

Rad [rd] to Millirad [mrd] Conversion Table

Rad [rd]	Millirad [mrd]

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Rad [rd] to Millirad [mrd] Conversion Table
Rad [rd]	Millirad [mrd]

Explore More Radiation Absorbed Dose Units Converter

What Is This Tool?

This converter helps you transform radiation absorbed dose measurements from rad units to millirad units. Rad and millirad are legacy non-SI units used to quantify the energy deposited by ionizing radiation per unit mass. The tool supports applications in medical, environmental, and materials testing contexts where finer dose increments are needed.

How to Use This Tool?

Enter the radiation dose value in rad (rd) you wish to convert.
Select rad as the input unit and millirad as the output unit.
Click the convert button to receive the equivalent value in millirad (mrd).
Review the conversion result to interpret absorbed dose in smaller, more precise units.

Key Features

Converts values between rad and millirad units accurately using the established conversion rate.
Supports understanding of legacy radiation dose units relevant for medical, environmental, and industrial uses.
Provides example conversions for easy reference and practical application.
Browser-based and easy to use with no installation required.

Examples

2 rad [rd] equals 2000 millirad [mrd].
0.5 rad [rd] equals 500 millirad [mrd].

Common Use Cases

Interpreting historical radiotherapy doses recorded in rad by converting them to millirad for finer granularity.
Monitoring low-level environmental or occupational radiation doses more precisely.
Calibrating survey meters and dosimeters that utilize rad-based units for measurement.

Tips & Best Practices

Ensure consistent use of units when reporting radiation doses to avoid confusion.
Use millirad units when dealing with very small absorbed doses for improved precision.
Refer to the conversion examples for accurate and reliable unit changes.
Verify conversion results when integrating legacy rad data with modern SI-based measurements.

Limitations

Both rad and millirad are legacy units and generally non-SI, so conversion to gray may be necessary for standardized reporting.
Instrument sensitivity may restrict accuracy when measuring very low doses in millirads.
Care is required to distinguish these units from other radiation dose units to maintain regulatory compliance.

Frequently Asked Questions

What is the relationship between rad and millirad?: One rad equals one thousand millirads; specifically, 1 rad [rd] = 1000 millirad [mrd].
Why convert rad measurements to millirad?: Converting to millirad allows expressing absorbed radiation doses in smaller increments, which is useful for detailed dosimetry and low-dose measurements.
Where are rad and millirad units commonly used?: They are used in medical radiotherapy, environmental monitoring, occupational safety, materials testing, and instrument calibration where legacy units persist.

Key Terminology

Rad (rd): A legacy unit of absorbed dose of ionizing radiation equal to 0.01 gray; expresses energy deposited per unit mass.
Millirad (mrd): One thousandth of a rad; a legacy CGS unit representing smaller increments of absorbed radiation dose.
Absorbed dose: The amount of energy from ionizing radiation deposited in a unit mass of material.

Quick Knowledge Check

What does 1 rad equal in millirad?

100 millirads

1000 millirads

10,000 millirads

Which unit is smaller?

Rad

Millirad

They are equal

Why are rad and millirad considered legacy units?

They are no longer used in any context

They are non-SI units replaced by gray

They were never standardized

Share Us

Similar Calculators

Online Viscosity Kinematic Units Converter Online Velocity Angular Units Converter Online Volume Dry Units Converter Online Moment of Force Units Converter Online Temperature Units Converter