What does pound-force per square foot measure?

It measures the surface pressure exerted uniformly over one square foot with a force of one pound-force, commonly used in US engineering.

When should I use foot water (60°F) as a pressure unit?

Foot water (60°F) is ideal for low-pressure hydrostatic measurements such as HVAC differentials, small fluid regulators, and laboratory manometer readings.

Can I use this conversion for high-pressure scenarios?

No, foot water (60°F) is suited for low-pressure ranges and may be impractical or inaccurate for high-pressure applications.

Convert Pound-force/square foot to Foot water (60°F) [ftAq] Online

Easily convert pressure values from pound-force per square foot to foot water (60°F) [ftAq] using this practical unit converter designed for engineering and HVAC applications.

Pound-force/square foot

Foot water (60°F) [ftAq]

Please check your input. It must be a valid numeric value.

Pound-force/square foot to Foot water (60°F) [ftAq] Conversion Table

Pound-force/square foot	Foot water (60°F) [ftAq]

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Pound-force/square foot to Foot water (60°F) [ftAq] Conversion Table
Pound-force/square foot	Foot water (60°F) [ftAq]

Explore More Pressure Units Converter

What Is This Tool?

This online converter transforms pressure measurements from pound-force per square foot to foot water (60°F) [ftAq]. It assists in converting surface load pressures into equivalent hydrostatic water column heights useful in structural engineering, HVAC design, and fluid pressure-related fields.

How to Use This Tool?

Enter the pressure value in pound-force per square foot
Select pound-force/square foot as the source unit
Choose foot water (60°F) [ftAq] as the target unit
Click the convert button to see the equivalent pressure
Review the results and apply them in engineering or fluid pressure contexts

Key Features

Converts pressure units from pound-force/square foot to foot water (60°F) [ftAq]
Browser-based and easy to use with no installation required
Useful for translating mechanical pressure to hydrostatic head values
Supports engineering and HVAC pressure conversion needs
Provides clear conversion examples for user reference

Examples

10 pound-force/square foot equals 0.16034293 foot water (60°F) [ftAq]
50 pound-force/square foot equals 0.80171465 foot water (60°F) [ftAq]

Common Use Cases

Specifying structural loads such as floor live loads and roof snow loads
Measuring wind pressure on exterior building surfaces
Calculating low-pressure differentials in HVAC systems and ventilation
Determining small fluid pressures in gas regulators and leak tests
Reading hydraulic head or pressure drops in laboratory manometers and water filters

Tips & Best Practices

Confirm pressure values are in pound-force per square foot before conversion
Use this conversion primarily for low-pressure and hydrostatic applications
Be mindful that variations in water temperature and gravity affect accuracy
Complement this conversion with engineering standards for precise load analysis
Apply converted values carefully when interpreting fluid pressure head

Limitations

Assumes standard gravity and water temperature fixed at 60°F for calculations
Foot water (60°F) unit is suitable only for low-pressure measurements
May not represent dynamic or non-hydrostatic pressure conditions accurately
Conversion mainly applies to static surface pressures and hydrostatic heads

Frequently Asked Questions

What does pound-force per square foot measure?: It measures the surface pressure exerted uniformly over one square foot with a force of one pound-force, commonly used in US engineering.
When should I use foot water (60°F) as a pressure unit?: Foot water (60°F) is ideal for low-pressure hydrostatic measurements such as HVAC differentials, small fluid regulators, and laboratory manometer readings.
Can I use this conversion for high-pressure scenarios?: No, foot water (60°F) is suited for low-pressure ranges and may be impractical or inaccurate for high-pressure applications.

Key Terminology

Pound-force per square foot: A pressure unit representing one pound-force applied uniformly over an area of one square foot, used for surface stresses in US customary engineering.
Foot water (60°F) [ftAq]: A pressure unit equal to the hydrostatic pressure from a one-foot column of pure water at 60°F under standard gravity, used for low-pressure hydrostatic measurements.

Quick Knowledge Check

What does 1 pound-force per square foot represent?

The force of one pound over a square inch

The force of one pound distributed over a square foot

The pressure caused by one pound of water height

For what temperature is the foot water (60°F) pressure based on?

60 degrees Fahrenheit

15.556 degrees Celsius

Both options are correct

Which field commonly uses pound-force/square foot units?

Structural engineering

Meteorology

Astronomy

Share Us

Similar Calculators

Online Thermal Resistance Units Converter Online Surface Current Density Units Converter Online Volume Units Converter Online Volume Dry Units Converter Online Weight and Mass Units Converter