What does CHU/hour/square foot measure?

It measures heat flux density as the amount of thermal energy transferred per hour across one square foot of surface.

Why convert to dyne/hour/centimeter?

Conversion to dyne/hour/centimeter is useful for interpreting older CGS-based scientific literature and specialized laboratory data.

Are dyne/hour/centimeter units common in engineering?

No, they are nonstandard and mostly used in specific research areas; SI units are usually preferred in engineering.

Convert CHU/hour/square foot to Dyne/hour/centimeter - Heat Flux Density Unit Converter

Use this tool to easily convert heat flux density values from CHU/hour/square foot to dyne/hour/centimeter, supporting HVAC, building physics, and scientific research applications.

CHU/hour/square foot

Dyne/hour/centimeter

Please check your input. It must be a valid numeric value.

CHU/hour/square foot to Dyne/hour/centimeter Conversion Table

CHU/hour/square foot	Dyne/hour/centimeter

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

CHU/hour/square foot to Dyne/hour/centimeter Conversion Table
CHU/hour/square foot	Dyne/hour/centimeter

Explore More Heat Flux Density Units Converter

What Is This Tool?

This converter changes heat flux density values between CHU/hour/square foot, a unit common in HVAC and building industry contexts, and dyne/hour/centimeter, a CGS-based unit used in laboratory and scientific fields. It facilitates interpreting heat transfer measurements across different unit systems.

How to Use This Tool?

Enter the heat flux density value in CHU/hour/square foot
Select CHU/hour/square foot as the input unit
Choose dyne/hour/centimeter as the output unit
Click convert to see the equivalent heat flux density in dyne/hour/centimeter
Use the output for analysis, comparison, or documentation as needed

Key Features

Converts heat flux density from CHU/hour/square foot to dyne/hour/centimeter
Supports comparison of building and HVAC data with CGS-based scientific literature
Browser-based and easy to use with direct input and output
Provides clear conversion results using established conversion factors
Useful for HVAC load calculations and experimental heat flux documentation

Examples

2 CHU/hour/square foot converts to 40883496.469774 Dyne/hour/centimeter
0.5 CHU/hour/square foot converts to 10220874.1174435 Dyne/hour/centimeter

Common Use Cases

Calculating HVAC loads and heat gain or loss per square foot
Comparing insulation and building envelope performance on an area basis
Sizing radiant heating or cooling equipment by required heat flux
Interpreting small heat or radiative fluxes in CGS-based laboratory literature
Converting astrophysical or meteorological flux data from CGS to modern units
Documenting microscale heat-transfer measurements using CGS units

Tips & Best Practices

Ensure units are consistent and conversions applied carefully due to large conversion factor
Use this conversion primarily for scientific or historical data requiring CGS units
Prefer SI units for practical engineering applications when precision and clarity are vital
Double-check outputs when working with nonstandard units like dyne/hour/centimeter
Reference conversion formulas carefully if using results in further calculations

Limitations

Dyne/hour/centimeter is a nonstandard and rarely used unit that can cause confusion
Conversion factor’s scale difference requires attention to unit consistency and precision
This unit is less useful outside specialized research and historical data contexts
SI units often provide clearer and more practical application results in engineering

Frequently Asked Questions

What does CHU/hour/square foot measure?: It measures heat flux density as the amount of thermal energy transferred per hour across one square foot of surface.
Why convert to dyne/hour/centimeter?: Conversion to dyne/hour/centimeter is useful for interpreting older CGS-based scientific literature and specialized laboratory data.
Are dyne/hour/centimeter units common in engineering?: No, they are nonstandard and mostly used in specific research areas; SI units are usually preferred in engineering.

Key Terminology

CHU/hour/square foot: A heat flux density unit expressing heat transfer per hour over one square foot, used in HVAC and building energy calculations.
Dyne/hour/centimeter: A CGS-derived, nonstandard heat flux density unit representing force per hour per centimeter length, used in specialized scientific contexts.
Heat Flux Density: The rate of heat energy transfer per unit area, typically expressed in power per unit area.

Quick Knowledge Check

Which unit is commonly used for HVAC heat flux density?

Dyne/hour/centimeter

CHU/hour/square foot

Erg/second

What is a key use of dyne/hour/centimeter units?

Building insulation design

Reporting small fluxes in CGS literature

Sizing heating equipment

What should be considered when converting between these units?

Large conversion factor scale

Identical unit scales

No need for unit consistency

Share Us

Similar Calculators

Online Temperature Units Converter Online Data Storage Units Converter Online Charge Units Converter Online Permeability Units Converter Online Linear Current Density Units Converter