What Is This Tool?
This tool converts mass flow rates of gasoline measured in kilogram per hour at 15.5°C to volumetric flow rates expressed in hundred-cubic foot per hour, facilitating comparisons between mass-based and volume-based flow measurements.
How to Use This Tool?
-
Enter the flow value in kilogram/hour for gasoline at 15.5°C
-
Select the input unit as kilogram/hour (Gasoline at 15.5°C)
-
Choose the output unit as hundred-cubic foot/hour
-
Click convert to view the corresponding volumetric flow rate
-
Use the result to compare or report flow rates in desired units
Key Features
-
Instantly converts gasoline flow from kilogram/hour at 15.5°C to hundred-cubic foot/hour
-
Uses density-referenced mass flow for accurate and consistent conversions
-
Supports applications in custody transfer, fuel metering, and natural gas utility management
-
Browser-based and easy to use without installation
-
Includes example calculations for quick reference
Examples
-
Converting 10 kilogram/hour (Gasoline at 15.5°C) results in approximately 0.004776583 hundred-cubic foot/hour
-
100 kilogram/hour (Gasoline at 15.5°C) is equivalent to about 0.04776583 hundred-cubic foot/hour
Common Use Cases
-
Custody transfer and billing where gasoline volumes are converted to mass at 15.5°C
-
Reporting fuel consumption standardized to a reference temperature for testing and comparisons
-
Calibration and verification of flow meters using mass flow rates corrected for density
-
Utility measurement and reporting of natural gas or small gas flow rates
-
Sizing and monitoring gas supplies to appliances or process equipment
-
Specifying ventilation and exhaust flow rates in systems using imperial units
Tips & Best Practices
-
Always reference gasoline flow rates to 15.5°C for consistent density-based conversions
-
Use this tool for low-to-moderate flow rates due to the conversion scale
-
Verify temperature and fuel composition to ensure conversion relevance
-
Apply conversion results for comparison between mass-based and volumetric systems
Limitations
-
Conversion accuracy depends on gasoline being at 15.5°C; variations affect results
-
Small conversion factor means this tool suits low volumetric flow rates better than large-scale applications
-
Not suitable for fuels other than gasoline at the specified reference temperature
Frequently Asked Questions
-
Why is the conversion specific to gasoline at 15.5°C?
-
Because the conversion uses density referenced to gasoline at 15.5°C to ensure consistent mass-to-volume calculations.
-
Can this converter be used for fuels other than gasoline?
-
No, the conversion is specifically defined for gasoline at 15.5°C and may not be accurate for other fuels.
-
What is hundred-cubic foot per hour used to measure?
-
It is a volume flow rate commonly used for measuring low-to-moderate gas or air flow rates in utilities and small equipment.
Key Terminology
-
Kilogram/hour (Gasoline at 15.5°C)
-
A mass flow rate unit specifying gasoline mass per hour, referenced to its density at 15.5°C for accurate conversion.
-
Hundred-cubic foot/hour
-
A volumetric flow rate equal to 100 cubic feet per hour, commonly used for measuring gas or air flow rates.
-
Density Referencing
-
Accounting for fuel density at a standard temperature to ensure reliable mass-to-volume conversions.