What Is This Tool?
This converter allows you to transform flow rate values from kilogram per hour for gasoline at the standard temperature of 15.5°C into cubic inches per second, a common volumetric flow rate unit used in small-scale flow measurements. It is especially useful for applications involving fuel metering and equipment that use imperial volumetric units.
How to Use This Tool?
-
Enter the flow rate value in kilogram per hour (gasoline at 15.5°C).
-
Select the 'kilogram/hour (Gasoline at 15.5°C)' as your input unit.
-
Choose 'cubic inch/second [in³/s]' as the output unit.
-
Submit the values to obtain the equivalent volumetric flow rate.
-
Use the conversion result for fuel flow analysis or equipment calibration.
Key Features
-
Converts mass flow rates of gasoline at 15.5°C to volumetric flow in cubic inch per second [in³/s].
-
Uses a standardized reference temperature for consistent mass-to-volume conversion.
-
Provides conversion suitable for precision applications in petroleum and fluid flow industries.
-
Offers clearly defined units to aid understanding and verification.
-
Includes examples demonstrating practical unit conversions.
Examples
-
10 kilogram/hour (Gasoline at 15.5°C) equals approximately 0.2293 cubic inch/second [in³/s].
-
50 kilogram/hour (Gasoline at 15.5°C) equals approximately 1.1464 cubic inch/second [in³/s].
Common Use Cases
-
Custody transfer and fuel billing at terminals where mass and volume are reconciled.
-
Fuel consumption reporting and engine performance standardization at reference temperatures.
-
Calibration and validation of flow meters using density-corrected mass flow references.
-
Measurement and specification of small liquid flow rates in hydraulic and pneumatic systems.
-
Accurate dispensing rate control in manufacturing or laboratory equipment using imperial units.
Tips & Best Practices
-
Ensure gasoline density corresponds to 15.5°C to maintain conversion accuracy.
-
Use this converter primarily for small to moderate flow rates; very large volumes may require additional scaling.
-
Double-check unit selections to avoid misinterpretation between mass and volume units.
-
Apply conversions consistently in reporting and equipment calibration to ensure reliable comparisons.
Limitations
-
Accuracy depends on maintaining gasoline density at 15.5°C; deviations may alter results.
-
Cubic inch per second is best suited for small volumetric flows and may not fit very large industrial flows without modification.
Frequently Asked Questions
-
Why is gasoline density at 15.5°C important for this conversion?
-
Gasoline density at 15.5°C standardizes the mass-to-volume relationship, ensuring consistent and accurate conversions between mass flow rates and volumetric flow rates.
-
Can I use this converter for large-scale industrial flow rates?
-
This tool is primarily designed for small to moderate flows expressed in cubic inch per second. Very large flows may require additional methods or unit scaling.
-
What industries commonly use this conversion?
-
Petroleum distribution, hydraulic and pneumatic system design, fuel flow performance testing, and precise fluid dispensing sectors use this conversion.
Key Terminology
-
Kilogram/hour (Gasoline at 15.5°C)
-
A mass flow rate unit indicating the kilograms of gasoline delivered or consumed per hour, referenced to gasoline density at the standard temperature of 15.5°C.
-
Cubic inch/second [in³/s]
-
A volumetric flow rate unit representing one cubic inch of fluid volume passing a point each second, commonly used in small-scale or imperial unit flow measurements.
-
Conversion Rate
-
The factor used to translate one unit quantity into another; here, 1 kilogram/hour (Gasoline at 15.5°C) equals about 0.0229276 cubic inch/second.