Why is gasoline density referenced to 15.5°C?

Gasoline volume and density are standardized at 15.5°C to allow consistent comparison and correction for thermal expansion in petroleum measurements.

Can I use this tool for high flow rates?

This converter is designed for very low flow rates; for higher flows, other measurement units or direct mass flow methods are recommended.

What does 1 cubic centimeter/hour represent?

It represents the flow of one milliliter of fluid per hour and is commonly used to quantify very low steady flows.

Convert Cubic Centimeter/Hour to Pound/Minute (Gasoline at 15.5°C)

Easily convert low volumetric flow rates from cubic centimeters per hour to mass flow in pounds per minute for gasoline at a standard reference temperature of 15.5°C, used in medical, microfluidic, and petroleum applications.

Cubic centimeter/hour

Pound/minute (Gasoline at 15.5%b0C)

Please check your input. It must be a valid numeric value.

Cubic centimeter/hour to Pound/minute (Gasoline at 15.5%b0C) Conversion Table

Cubic centimeter/hour	Pound/minute (Gasoline at 15.5%b0C)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Cubic centimeter/hour to Pound/minute (Gasoline at 15.5%b0C) Conversion Table
Cubic centimeter/hour	Pound/minute (Gasoline at 15.5%b0C)

Explore More Flow Units Converter

What Is This Tool?

This online converter transforms flow measurements from cubic centimeters per hour to pounds per minute specifically for gasoline at 15.5°C. It helps translate very low volume flow rates into a temperature-referenced mass flow rate essential for consistency in gasoline handling and petroleum operations.

How to Use This Tool?

Enter the value in cubic centimeters per hour you want to convert
Select the appropriate units if necessary (cubic centimeter/hour to pound/minute for gasoline at 15.5°C)
Click the convert button to get the equivalent mass flow rate
Use the result to report or analyze flow rates in your application

Key Features

Converts volumetric flow rates (cubic centimeter/hour) to mass flow rates (pound/minute) for gasoline at 15.5°C
Uses a conversion factor accounting for gasoline density at a standard temperature of 15.5°C
Ideal for very low flow rates and precision applications
Supports flows relevant in medical devices, microfluidics, and petroleum industry
Browser-based and easy to use without any installation

Examples

100 cubic centimeters/hour equals 0.00271657 pound/minute (Gasoline at 15.5°C)
500 cubic centimeters/hour equals 0.01358285 pound/minute (Gasoline at 15.5°C)

Common Use Cases

Setting and reporting very low infusion rates in medical pumps
Specifying flows in microfluidic experiments and precision pumping systems
Measuring small leak or dispensing rates in engineering tests
Custody transfer and invoicing of gasoline where volumes are corrected to 15.5°C
Refinery and terminal metering for consistent gasoline loading and quality control
Engineering calculations for pipeline design, pump selection, and fuel consumption

Tips & Best Practices

Always ensure the gasoline density corresponds to 15.5°C for accurate mass flow conversion
Use this conversion for very low flow rates; consider other units for larger scales
Verify the source temperature conditions when comparing measurements
Apply conversions consistently in petroleum custody transfer to maintain standardization

Limitations

Assumes gasoline density specifically referenced at 15.5°C, so deviations in temperature or composition may cause errors
Best suited for very low flow ranges; higher flows may require different units or direct mass flow measurement

Frequently Asked Questions

Why is gasoline density referenced to 15.5°C?: Gasoline volume and density are standardized at 15.5°C to allow consistent comparison and correction for thermal expansion in petroleum measurements.
Can I use this tool for high flow rates?: This converter is designed for very low flow rates; for higher flows, other measurement units or direct mass flow methods are recommended.
What does 1 cubic centimeter/hour represent?: It represents the flow of one milliliter of fluid per hour and is commonly used to quantify very low steady flows.

Key Terminology

Cubic Centimeter/Hour: A volumetric flow unit representing one milliliter of fluid passing per hour, used for very low steady flows.
Pound/Minute (Gasoline at 15.5°C): A mass flow rate unit indicating pounds of gasoline flowing per minute, with gasoline density standardized at 15.5°C.
Flow Rate: The quantity of fluid moving through a point per unit time, measured either by volume or mass.

Quick Knowledge Check

What does the unit cubic centimeter/hour measure?

Mass flow rate of a fluid per minute

Volumetric flow rate of fluid per hour

Temperature of gasoline at standard conditions

Why is gasoline flow referenced to 15.5°C in this conversion?

To account for gasoline density changes due to temperature

Because 15.5°C is the average gasoline temperature worldwide

It's the boiling point of gasoline

For what kind of flow rates is this unit conversion most suitable?

Very low flow rates

High flow rates

Any flow rate without restrictions

Share Us

Similar Calculators

Online Volume Units Converter Online Illumination Units Converter Online Magnetic Field Strength Units Converter Online Moment of Force Units Converter Online Data Transfer Units Converter