What Is This Tool?
This converter transforms fuel mass flow rates measured in kilogram/second (gasoline at 15.5°C) into volumetric flow rates expressed as cubic centimeters per hour. It enables users to interpret gasoline flow by converting mass-based measurements at a standard reference temperature to volumetric units.
How to Use This Tool?
-
Enter the value in kilogram/second (gasoline at 15.5°C)
-
Select the target unit as cubic centimeter/hour
-
Submit to get the equivalent volumetric flow value instantly
Key Features
-
Converts gasoline mass flow rate at 15.5°C to volumetric flow rate
-
Supports precise translation between kilogram/second and cubic centimeter/hour units
-
Based on standardized gasoline density at 15.5°C for accurate referencing
-
Offers quick online conversion suitable for various industrial and laboratory needs
Examples
-
2 kilogram/second (gasoline at 15.5°C) equals 9,738,559.49 cubic centimeter/hour
-
0.5 kilogram/second (gasoline at 15.5°C) equals 2,434,639.87 cubic centimeter/hour
Common Use Cases
-
Metering fuel mass flow in engines or turbines for combustion management
-
Custody transfer and billing at fuel terminals and dispenser systems
-
Calibration of flow meters and control in refineries or pipelines
-
Setting very low infusion rates in medical pumps
-
Specifying flows in microfluidic devices and precision pumping systems
-
Measuring small leak or dispensing rates in engineering tests
Tips & Best Practices
-
Ensure gasoline density reference temperature is 15.5°C for consistent results
-
Use cubic centimeter/hour for low flow rates to maintain measurement relevance
-
Verify flow meter calibration for both mass and volumetric units to improve conversion reliability
Limitations
-
Conversion accuracy depends on gasoline density at 15.5°C and may vary with temperature or fuel composition
-
Cubic centimeter/hour unit is best for very low flow rates and may be impractical for larger volumes
-
Measurement precision of instruments affects the dependability of converted values
Frequently Asked Questions
-
Why is gasoline density referenced at 15.5°C for conversion?
-
The density at 15.5°C is a standard reference used to account for temperature-dependent variations in gasoline density, ensuring consistent mass-to-volume flow conversions.
-
Can this tool convert any fuel flow units?
-
This converter specifically handles kilogram/second (gasoline at 15.5°C) to cubic centimeter/hour flows and is tailored to gasoline density at this reference temperature.
-
Is cubic centimeter/hour suitable for high flow measurements?
-
Cubic centimeter/hour is designed for very low flow rates and may be cumbersome for high flow volumes without appropriate scaling.
Key Terminology
-
Kilogram/second (Gasoline at 15.5°C)
-
A mass flow rate unit indicating how many kilograms of gasoline pass a point each second, referencing density at 15.5°C for temperature consistency.
-
Cubic centimeter/hour
-
A volumetric flow rate unit representing one cubic centimeter of fluid passing per hour, often used for very low flow measurements.
-
Density Reference Temperature
-
The standardized temperature (15.5°C) used to define gasoline density for consistent mass-to-volume flow conversions.